Went ahead and did a walk through of my break out board wiring:
ThunderDork » DIY CNC Router – CNC4PC.COM C11 Wiring
This is for the C11 Breakout Board from CNC4PC
Anybody feel free to critique my work. I'm learning as I go.
Went ahead and did a walk through of my break out board wiring:
ThunderDork » DIY CNC Router – CNC4PC.COM C11 Wiring
This is for the C11 Breakout Board from CNC4PC
Anybody feel free to critique my work. I'm learning as I go.
nice work. very helpful.
Jacob