585,758 active members*
4,572 visitors online*
Register for free
Login

Thread: Torch height control

Results 1 to 4 of 4
  1. 07-27-2012, 09:08 PM #1
    Bobnire
    Bobnire is offline Registered
    Join Date
    Jul 2010
    Posts
    0

    Torch height control

    Still working on my first project which is a 10' x 5' plasma table. Nothing fancy just purpose made rollers running on inverted angle and hollow section and driven by belts.

    I have came across loads of issues I have to iron out but the main problem I have now is with a THC I bought from Poland on ebay.

    http://proma-elektronika.pl/download/doc/thc_en.pdf

    Could someone please tell me how to connect it to either the 15 pin plug or 12 pin connector on the board below?

    3 Axis TB6560 CNC Stepper Motor Driver Board Controller | eBay

    Thanks

    Bob
    Reply With Quote Reply With Quote
  2. 07-29-2012, 02:16 PM #2
    dodger889
    dodger889 is offline Member
    Join Date
    May 2012
    Posts
    231
    Are you using mach3 to drive the BOB-driver board?
    Reply With Quote Reply With Quote
  3. 07-29-2012, 08:23 PM #3
    Bobnire
    Bobnire is offline Registered
    Join Date
    Jul 2010
    Posts
    0
    Yes I am using Mach 3.

    My problem is where to connect the up - down wires to in the board as outside the 15 pin remote plug and 12 pin connector which seems to be for a dro, all other connections are used up
    Reply With Quote Reply With Quote
  4. 12-16-2012, 10:48 AM #4
    jjs4x4
    jjs4x4 is offline Registered
    Join Date
    Dec 2012
    Posts
    15
    Did you ever get this figured out?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. DIY Torch Height Control
    By tjb1 in forum Stepper Motors / Drives
    Replies: 33
    Last Post: 12-21-2016, 05:12 PM
  2. Torch Height Control
    By Rxe in forum Waterjet General Topics
    Replies: 7
    Last Post: 04-07-2010, 12:09 PM
  3. Need better torch height control?
    By Karl_T in forum Waterjet General Topics
    Replies: 4
    Last Post: 04-27-2009, 05:36 PM
  4. Torch Height Control
    By luther in forum Plasma, EDM / Other similar machine Project Log
    Replies: 4
    Last Post: 07-12-2007, 09:51 PM
  5. Torch Height Control / Capacitive Height Control
    By ahlbebuck in forum Open Source Controller Boards
    Replies: 0
    Last Post: 11-27-2006, 08:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules