Just started using Deskengrave to do small text engraving jobs. It is quick and very easy to use, can use any font found in Windows word processer and outputs simple and straight forward g-code. I was looking for something to use on the Proto-trak sport mills at work, and it works great. Proto-trak
MX-3's are very tight on memory (500 lines of g code) but the basic "stick letters" in desk engrave worked great. Only edit I had to do is on the second line of g code I had to change the tool number to T1 from T0 to get the Z axis to move. I then did a fancier engraving program on a Fadal with great results. If you are looking for a quick and easy text engraving program for FREE, give it a try. You can download it for free from the Deskcnc website.