584,805 active members*
5,200 visitors online*
Register for free
Login
Results 1 to 8 of 8
  1. #1
    Join Date
    Jul 2012
    Posts
    0

    EZ-Trak pc software?

    Hi there CNC Gurus.

    Where I work now have 2 older EZ-Traks.

    I used to have the software to use on a PC.

    Does anyone in CNC land know where I could get another copy?

    The people at work use it as a Bridgeport with a readout on it "ONLY"

    Please advise.

    Thanks

  2. #2
    Join Date
    Jul 2012
    Posts
    0
    No Disrespect but this is the second question I've asked with no responces.

    I went from the MasterCam forum to here.

    Second thoughts....

  3. #3
    Join Date
    May 2004
    Posts
    4519
    Here is what I have. I think this is the machine boot disk. I don't know if you can run it on a PC. I think it searches for the drives on boot and errors if none are found.
    Attached Files Attached Files

  4. #4
    Join Date
    Jul 2012
    Posts
    0
    Thank you txcncman.

    I will give it a try.

  5. #5
    Join Date
    Mar 2019
    Posts
    2

    Re: EZ-Trak pc software?

    Hi Ken,
    It works?
    i have a Bridgeport EZTRAK 1992 and need software.
    very important to me your comments.
    regards

  6. #6

    Re: EZ-Trak pc software?

    Hi Txcncman
    I have downloaded the boot disk will try on my machine
    Can this be copied to a hard drive as my machine has both Floppy & Hard drive
    Thanks
    Bill

  7. #7
    Join Date
    Apr 2005
    Posts
    304

    Re: EZ-Trak pc software?

    Wow, what an old DOS.
    You can boot your computer from the floppy on which you have to unzip this archive.
    Autoexec.bat will do the rest, i.e. copy and expand needed files to your C drive
    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.

  8. #8
    Join Date
    Jul 2019
    Posts
    7

    Re: EZ-Trak pc software?

    maybe you better order an individual development?

Similar Threads

  1. EZ-Trak 6.00_5.78 software on a EZ-Trak SX mill causes Initgrafix error
    By Greatdaen in forum Bridgeport / Hardinge Mills
    Replies: 6
    Last Post: 08-31-2021, 04:07 PM
  2. EZ-Trak SX Software
    By nippy7 in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 11-04-2020, 08:32 PM
  3. EZ-Trak 6.00_5.78 software on a EZ-Trak SX mill?
    By Greatdaen in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 09-23-2013, 11:26 PM
  4. EZ TRAK SOFTWARE HELP
    By dano58 in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 10-10-2011, 01:52 PM
  5. EZ-TRAK software
    By fuzz in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 05-10-2010, 05:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •