[leszek0213]

Hi All
i am setting up a mill witch yasnac i80 controller and the machine won't accept G68 and G69 codes could someone help me with that???? this is the program i am trying to run

G28G91Z0
T7
G90G55
G68 X0 Y0 R.
G0X1.882 Y0 S100 M3
G43 H7 Z.1
G1 Z0 F80
G98 P1000
G69

and the machine gives me INVALID G CODE ALARM

[SirDenisNayland]

Machine doesn't have the coordinate rotation function.

Only way is to make your own using matrix rotations with a modal macro call, provided your control has macro functionality.

But you may find like I recently did that your i80 did not come with macro functionality much like your coordinate rotation :/

I did notice you left out a degree of rotation in your G68 line, but that would give an invalid arguments alarm if the function were available. Perhaps worth a shot. Actually looking at your code i don't see why you need this at all actually. Your code is very messy too for what its worth. Don't forget your decimal points.

[Ashish B]

Hi,

If your machine doesn't supports G68 command, then you can download the evaluation version of COMPUTER AIDED SETUP Software. This software will rotate the NC Programs. For more details, please visit www.computeraidedsetup.com

The evaluation version download link is located on Page 6 of the website.

If you are unable to download the evaluation version, then i can rotate the NC Programs for you. Please let me know that by what angle should i rotate the NC Program

Thanks
Ashish

[cncts11]

Or get the coordinate rotation option...