[JohnRF]

Tool 1 runs fine but when it comes to tool 2 it wants me to remove tool from spindle and press start, confused.

This is my program, anyone know what I'm doing wrong???

N1 G70 G75 G90
N2 G0 T1 M6
N3 G0 X-.1563 Y.625
N4 S3667 M3
N5 Z.25 M08
N6 Z.15
N7 G1 Z-.5 F36.7
N8 Y.4688
N9 G3 X0. Y.3125 I0. J0.4688
N10 G1 X1.5
N11 G2 X1.8125 Y0. I1.5 J0.
N12 G1 Y-.505
N13 G2 X1.5 Y-.8175 I1.5 J-0.505
N14 G1 X0.
N15 G2 X-.3125 Y-.505 I0. J-0.505
N16 G1 Y0.
N17 G2 X0. Y.3125 I0. J0.
N18 G3 X.1563 Y.4688 I0. J0.4688
N19 G1 Y.625
N20 G0 Z.25
N21 X-.6875 Y-.2525
N22 Z.15
N23 G1 Z0. F20.0
N24 X2.1875
N25 G0 Z.25
N26 M09
N27 M5
N28 G0 M25
N29 G0 T2 M6
N30 G0 X.563 Y-.252 M08
N31 S2972 M3
N32 X.563 Y-.252
N33 Z.1 M08
N34 G81 X.563 Y-.252 Z.4 F14.9
N35 X.938 Z.4
N36 G80
N37 M09
N38 M5
N39 G0 M25
N40 G0 T3 M6
N41 G0 X.563 Y-.252 M08
N42 S2000 M3
N43 X.563 Y-.252
N44 Z.1 M08
N45 G81 X.563 Y-.252 Z.15 F10.0
N46 X.938 Z.15
N47 G80
N48 M09
N49 M5
N50 G0 M25
N51 M2
E

[gthlm]

Not sure which control you have but sounds like you have tool 1 set as a manual tool, so it's asking you to unload it by hand before it loads tool 2.