584,841 active members*
4,443 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > CNC Swiss Screw Machines > Citizen M20(Classic M20) turret A-axis programmin
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2012
    Posts
    19

    Citizen M20(Classic M20) turret A-axis programmin

    I've always wondered why this machine has a programmable A-axis for the turret rotation. Has anyone ever used the A-axis for machining? For instance, could it be a substitude for a Y-axis application? I know it would be a little difficult to program since the A-axis programs in degrees, but I'm just looking to get someones feedback on any experience they have with the M20 A-axis.

  2. #2
    Join Date
    Feb 2008
    Posts
    267
    The original intent for the A axis was for in-process gaging.
    This was picutred in the brochure, but I do not think it was employed too often, if ever, especially in US.
    This is the reason that the turrent will not index a full 360°.
    I think if you're on T2000 and call T2900, it goes "the long way".
    This was to prevent sensor cable twisting.
    As far as using it to program or cut, I've never heard of anyone doing it, but it may well be possible.
    Control the process, not the product!
    Machining is more science than art, master the science and the artistry will be evident.

Similar Threads

  1. Citizen E32 No. 2 Turret Servo Alarm
    By gizmo_454 in forum CNC Swiss Screw Machines
    Replies: 2
    Last Post: 01-25-2013, 01:49 AM
  2. Citizen F-20 Turret Alignment
    By yoopertool in forum CNC Swiss Screw Machines
    Replies: 3
    Last Post: 03-23-2010, 05:35 PM
  3. VB.net Programmin related question....
    By pritamdulam in forum UG NX
    Replies: 2
    Last Post: 09-08-2009, 07:48 PM
  4. Feeding in C axis on a Citizen A16?
    By PoiToi in forum CNC Swiss Screw Machines
    Replies: 9
    Last Post: 03-23-2009, 01:17 PM
  5. Classic DROs & CNC
    By oisyaot in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 02-16-2008, 10:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •