I am running a Bridgeport VMC 1000 Mill controlled by DX-32. When I program a tool change, the spindle turns off like it is supposed to do, but I get a message that says "Spindle not up to speed in time" Then the drives shut off and I have to restart everything. What do I need to do to keep the error message from coming up and shutting everything down??
Thread: DX-32 Problem
Results 1 to 3 of 3
-
08-14-2012, 01:15 AM #1
- Join Date
- Apr 2012
- Posts
- 11
DX-32 Problem
-
12-26-2020, 01:16 AM #2
Registered
- Join Date
- Jan 2018
- Posts
- 44
Re: DX-32 Problem
Did you ever figure this problem out? My machine is doing the exact same thing.
-
12-26-2020, 02:22 AM #3
Banned
- Join Date
- Aug 2009
- Posts
- 1570
Re: DX-32 Problem
...Backup all MTB param's write them down ASAP before something else fails during troubleshooting anything would be my advice to start> then ...power supply voltages would be the 1st to suspect to do age.
Merry Xmas
Reply With QuoteSimilar Threads
-
Having problem with CNC driver/card problem
By todatop in forum Commercial CNC Wood RoutersReplies: 0Last Post: 04-09-2014, 05:45 PM -
Tube problem or powersupply problem? Help you to check out
By Melody-gweike in forum Laser Engraving / Cutting Machine General TopicsReplies: 0Last Post: 10-05-2012, 04:09 AM -
daewoo puma 12lb tape format problem/parameter problem
By robb12877 in forum Daewoo/DoosanReplies: 0Last Post: 08-25-2011, 06:13 AM -
Surface finish problem - Could you please help me overcome this problem?
By DMBGO in forum EMCO LatheReplies: 5Last Post: 08-04-2010, 11:33 PM -
machine problem or software problem?
By bcnc in forum Syil ProductsReplies: 8Last Post: 10-26-2009, 03:51 PM
Tags for this Thread
Posting Permissions
