im using a vexta 5 phase motor n driver but it only turns in one direction(CCW)
when i press the up down key the DRO shows +/- values but the motor only rotates in CCW direction..?
can any one help what may be the problem..it's with the printer port assigning wrong addresses or with the wiring?
Results 1 to 1 of 1
-
08-14-2012, 02:52 PM #1
Registered
- Join Date
- Jul 2012
- Posts
- 0
Stepper motor turns in 1 direction only with mach3
Reply With QuoteSimilar Threads
-
Z-axis only turns in ONE direction, anyone know what might be wrong?
By effimos in forum DIY CNC Router Table MachinesReplies: 18Last Post: 03-15-2012, 01:20 PM -
Help !! Stepper only turns in one direction?
By Racelogic in forum Stepper Motors / DrivesReplies: 2Last Post: 11-21-2010, 12:04 AM -
Stepper only turns in one direction
By Racelogic in forum CNC Machine Related ElectronicsReplies: 1Last Post: 11-15-2010, 07:17 AM -
Stepper motor only turns one way
By henryblowery in forum Stepper Motors / DrivesReplies: 6Last Post: 12-21-2008, 05:01 AM -
Stepper turns only one direction
By jhowelb in forum Stepper Motors / DrivesReplies: 0Last Post: 10-04-2007, 01:52 AM
Posting Permissions
