Hello I wonder if any one can help I have a North East Electronics CNC Control Type PNC4 it is complete with the three 2.5 amp stepper drives but I have one problem I cant get hold of the manual for the socket connections on the rear of the control there is a 25 pin D section socket which has the pin outs for the three stepper drives and maybe the pinouts for a Forth axis, also there is a round socket for the limit switches and safety circuits I have the software to connect with it and also the GPS software for the later AMC 4 Control and the manuals to match but they are not quite the same as the PNC 4 is stepper drive & the AMC 4 is servo drive. If anyone can help I would be most grateful any cost incurred could be met and as this is quite a nice compact cnc control I would like to connect it a small Milling machine.
Thanks Colin1544