[Yachaan]

BREAK-OUT-BOARD:
IPL5X-USB-iso-BOB

Here is my design of a 5 axis isolated USB BOB based on the IPL5X.
Thanks for the dedicated help by Pascal Langer, one of the original designers.
If you can improve, I would like to incorporate it.
Therefore the first 5 posts is subject to editing.
The Linnistepper & Mardus Kreutz 8A Unipolar & Bipolar designs is also included here.
This is Eagle PCB - so that you can use it.

Other files you may need:
5X-Project | Téléchargements
Isolation for the USB:
Adum4160 & USBUF02W6 | EngineerZone

[Yachaan]

DRIVERS: LINISTEPPER
Here is my version of the Linistepper :wave:

[Yachaan]

DRIVERS: MARDUS KREUTZ
Here is my version of the Mardus Kreutz 8A :wave:

[Yachaan]

I am to insert a 1-30Acapable 3Phase Bipolar design here using a ARM Cortex™-M3 32-bit RISC processor (chair)

A Preview:

[Yachaan]

this post I reserve for adding important stuff:banana:

[James Newton]

Looks neat! Have you actually built any of this yet? If they are tested working designs, I would be happy to host the files at the Linistepper open source page as a more perminant location.

[Yachaan]

My Linistepper has got wrong pcb - ill try to edit it - and mark it as such.
In the mean time - go here:
http://www.cnczone.com/forums/open_s...nt_sensor.html

[Yachaan]

I have updated the breakout board and asked admin to make it possible for me to keep the first 5 posts open to updates from me. To date it has not been done.


Mardus Kreutz is so kind as to review my version as soon as he has time
(group)

[Yachaan]

UPDATED

[Yachaan]

Other Files you need and may need in case that site is down:
Files A

[Yachaan]

Other Files you need and may need in case that site is down:
Files B
I have problems uploading:
Install_RPFC1_12.EXE
Install_RPFMS3_7.EXE
[both zipped]
RP-FMS V2.pdf.zip
The biggest is 3.3mb - I am supposed to be able to upload 8,5mb zips and PDF's

[codymarc]

Hi, can this board be used with Mach3????

[Yachaan]

Hi, I dont know, please contact someone at the French site : 5X-Project | LE Projet
to find that out. The programmer can tell you that.