Ok, so I wanted to put the vice on my working page with the work piece inside the jaws. So I import the cnc vise onto the page and it's the size of a grain of rice. I have been messing with it for over an hour to get it an accurate size and I've failed.:bs:
Any suggestions would be greatly appreciated. I downloaded the zip file for the cnc (5 inch) vise from Sprutcam. It's for my tormach.
Your help would be greatly appreciated.
Regards~
BT
Results 1 to 4 of 4
-
08-19-2012, 09:21 PM #1
Registered
- Join Date
- Aug 2012
- Posts
- 7
Help! My imported cnc vice is tiny...
-
08-19-2012, 09:26 PM #2
Gold Member
- Join Date
- May 2004
- Posts
- 4519
Scale it times 25.4
-
08-19-2012, 10:59 PM #3
Registered
- Join Date
- Aug 2012
- Posts
- 7
When I do, the entire working piece gets bigger as well.
In addition, how do you scale it to its proper size? I'll just be guessing.
-
08-20-2012, 04:00 AM #4
Registered
- Join Date
- Aug 2012
- Posts
- 7
Ok.
Highlight the vice, and all its parts, then scale it, move it and the working piece onto the bed. Weird.
Reply With QuoteSimilar Threads
-
Can't use imported DFX or DWG files
By cijunet in forum GibbsCAMReplies: 5Last Post: 10-20-2019, 10:03 PM -
What filetypes can be imported?
By autobot in forum Dolphin CAD/CAMReplies: 2Last Post: 09-12-2011, 10:16 PM -
DFX is not imported correctly...
By ihkim in forum Uncategorised CAM DiscussionReplies: 11Last Post: 01-07-2010, 06:57 PM -
imported
By ultrapeter in forum SolidworksReplies: 2Last Post: 06-28-2009, 12:53 PM -
Imported DFX drawings are tiny
By Mrebeiro70 in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 10-19-2007, 02:22 PM
Posting Permissions
