512,923 active members
2,776 visitors online
Register for free
IndustryArena Forum > CAM Software > SprutCAM > Help! My imported cnc vice is tiny...
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2012

    Help! My imported cnc vice is tiny...

    Ok, so I wanted to put the vice on my working page with the work piece inside the jaws. So I import the cnc vise onto the page and it's the size of a grain of rice. I have been messing with it for over an hour to get it an accurate size and I've failed.:bs:

    Any suggestions would be greatly appreciated. I downloaded the zip file for the cnc (5 inch) vise from Sprutcam. It's for my tormach.

    Your help would be greatly appreciated.



  2. #2
    Gold Member
    Join Date
    May 2004
    Scale it times 25.4

  3. #3
    Join Date
    Aug 2012
    When I do, the entire working piece gets bigger as well.

    In addition, how do you scale it to its proper size? I'll just be guessing.

  4. #4
    Join Date
    Aug 2012

    Highlight the vice, and all its parts, then scale it, move it and the working piece onto the bed. Weird.

Similar Threads

  1. Can't use imported DFX or DWG files
    By cijunet in forum GibbsCAM
    Replies: 5
    Last Post: 10-20-2019, 10:03 PM
  2. What filetypes can be imported?
    By autobot in forum Dolphin CADCAM
    Replies: 2
    Last Post: 09-12-2011, 10:16 PM
  3. DFX is not imported correctly...
    By ihkim in forum GRZ Software- MeshCAM
    Replies: 11
    Last Post: 01-07-2010, 06:57 PM
  4. imported
    By ultrapeter in forum Solidworks
    Replies: 2
    Last Post: 06-28-2009, 12:53 PM
  5. Imported DFX drawings are tiny
    By Mrebeiro70 in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 1
    Last Post: 10-19-2007, 02:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts