My machine, a KM3P which was upgraded from a std Max II to MAX32 came with nearly very option Hurco could sell a customer for that machine.
I have a box for the Ultimax PC, with 3 sets of manuals (apparently never used) the 5 1/4" floppy disc dust jackets but no sign of the actual media or dongal. The prior owner did everything in MasterCAM so the code could be POSTED for other VMC's for final production. About the only time he ran in conversational was to cut steps in vise jaws.
I contacted Hurco maybe 2 years ago and when I ask about it they just laughed at me. Basically if you have a machine with a dual screen Max II consol your on your own or will be dealing with third party vendors.
I was hunting for a good KM3 to retrofit when I found this gem. I used Ultimax from 86-01 and for very short run and proto's its the best thing since bottled beer and sliced bread.
With the great options this machine had plus the upgrade to the awesome power of the Intel 386/387 processor platform I was glad to get it as it was. (a Max II uses the 8086/8087 @ a blazing 4.077Mhz ) ( I often wondered if I could have plugged in a NEC V20 CPU )
Anyway - If anyone knows of one of these (Ultimax PC software and dongal) that has been set aside due to age or upgrades I would love to get my hands on one.