Hi,
Every CAM software outputize the NC Program through various techniques. If you try Delcam Powermill, then you have the following output options -
1. FIT ARCS
2. TOLERANCE ARCS
3. TOLERANCE & FIT ARCS.
I think that your problem is something similar one ( In your CAM Software ...GibbsCAM )
I can provide you a NC Program (containing I,J,K values). Please mail me your Model on [email protected] & also mention the various parameters (like Stepover, avaliable cutters, stock, feed, speed).
Thanks
Ashish
Get your CAM Programs rotated by CAS software to REDUCE SETUP TIME on your VMC & HMC. To download it, visit www.computeraidedsetup.com