584,865 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 8 of 8
  1. #1
    Join Date
    Jun 2003
    Posts
    65

    Surfcam Post Processor

    Hi all,

    Does anyone have a post processor for Surfcam.

    Thanks,
    Will

  2. #2
    Join Date
    Sep 2004
    Posts
    218
    You may want to try the post for AllenBradley8400 Control I recently was tipped about this one for use with TCNC. I have used the HAAS post with a little editing with TCNC. If they were included with Surfcam give them a try. Good luck.

    Bowman

  3. #3
    Join Date
    Jun 2003
    Posts
    65
    Quote Originally Posted by Bowman
    You may want to try the post for AllenBradley8400 Control I recently was tipped about this one for use with TCNC. I have used the HAAS post with a little editing with TCNC. If they were included with Surfcam give them a try. Good luck.

    Bowman
    I also have been using the Haas post with some tweaking, but the 4axis is totalty messed up. I will try the AllenBradley8400.

    Will

  4. #4
    Join Date
    Jan 2006
    Posts
    5
    I need some help with Surfcam. I have had to change computers due to a crash and now I need to get my post processor working again. I need to know how to activate one of the post already listed and also how to get my custom post to work. Which files to put where. Any help would be greatly appreciated

  5. #5
    Join Date
    Jun 2003
    Posts
    65
    Quote Originally Posted by JDEMPSEY
    I need some help with Surfcam. I have had to change computers due to a crash and now I need to get my post processor working again. I need to know how to activate one of the post already listed and also how to get my custom post to work. Which files to put where. Any help would be greatly appreciated
    Which post in surfcam do you need?

  6. #6
    Join Date
    Jan 2006
    Posts
    5

    surfcam post help

    I have the post. I have one for HAAS 5 axis. On the old computer I was using the out of the box HAAS VF post for 3 axis work and now it tells me path not found when I try to use it on the new computer. I have no idea on what to do to fix it. I also have no idea which files to put where so I can use my 5 axis post.

  7. #7
    Join Date
    Jun 2003
    Posts
    65
    Sorry, been away for awhile,

    If you have a copy of your post, just copy and paste you post in the "Postform.m" located in the "Postlib" folder of the Surfcam directory.
    Afterwards restart Surfcam and you should see it in the operations manager.

  8. #8
    Join Date
    Jul 2010
    Posts
    14
    Dear JDEMPSEY

    Can you please send me the HAAS 5 axis post to test it?
    Thanks
    my e mail: [email protected]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •