Hi Joe
Im considering buying your 4x4 plans, however i have a question. with the plans do you supply a cad drawing? or cnc cutting file for the parts as I have acces to a cnc service here to cut out the parts? this would speed up the build.
Thanks
Mac
I'm curious how the base top is secured to the base stands on the EVO?? Is it bolted? Is there enough room to clear the bolt heads on the v bearings?
Howdy Joe-
I purchased the plans earlier today.
I have decided to build the Evolution.
Can you tell me what size is the evoulution model in the video ??
I would like to build something capable of handeling a 4 ft by 4 ft sheet of plywood.
So does that mean I need to build it 50" x 50" ??
Now the real question is what paint scheme to go with.
I am thinking since I am a Texan, I may have to come up with a red, white, and blue ...........................
Thanks
Super Dave
Big Kahuna Woodworks.
Bonjours tous le monde
je suis nouveau sur ce forum ,je suis de l ile de la REUNION dans l océan INDIEN , bien loin de chez vous , voila , j ai un projet de monter ma propre cnc , j ai fait pas mal de forum sur le sujet et pas mal de videos,celui qui ma interpeller est celui de JOE la CNC 4X4 EVO , je la trouve super interessante , pour ce que j ai a faire .je commence juste a rassembler les piéces pour la construire , faut dire que sur l ile dur dur de trouver du matos,faut les commander
j aimerais savoir si JOE pourrais me dire le prix du plans pour son The Evolution Kit Attachment 348876 , ça serait super , comme ça je pourrais les usiner directement , ici , ça m'évite d attendre trop longtemps , vu la distance qui nous separe
merci d avance
CORDIALEMENT
I was just about ready to design my first 4' x 4' router, something that'll suit my needs. However, going through these posts / pictures, it seems this design is very close to what I want, the plans might be a good investment.
Is Joe still active? I shot him an email, but have yet to see a response come back :-/
@Lotus What program are you using to do your design?