584,808 active members*
5,362 visitors online*
Register for free
Login
Results 1 to 13 of 13
  1. #1
    Join Date
    Aug 2012
    Posts
    8

    hitachi seiki ht20s iii

    Does anyone know where I can get the electric schematics for a hitachi seiki HT 20S III?

    thanks
    goyo

  2. #2
    Join Date
    Aug 2012
    Posts
    164
    I may have this at my office (pdf version) ...I'll check in the morning.

  3. #3
    Join Date
    Aug 2012
    Posts
    8

    hitachi seiki

    thanks, Standing by......

  4. #4
    Join Date
    Aug 2012
    Posts
    164
    Only have the machining center schematics on the server. I have several customers with that machine, not sure if they have the same control as you do. Do you need the entire copy or are you in need of just the section pertaining to a particular problem (I might be able to get them to scan that section of the document if necessary)? If you need the whole copy, then I suggest you contact your local Mori dealer and see what they would charge you (if at all) for a copy.

  5. #5
    Join Date
    Aug 2012
    Posts
    8
    thanks for the reply,
    We transfered the machine to a dif location and after new install the spindle won't turn,
    So anything related to the spindle will help.
    thank you

  6. #6
    Join Date
    Aug 2012
    Posts
    164
    OK, I will ask around. What is the control? What is the spindle drive unit? Is there an alarm on the screen or the spindle drive unit?

  7. #7
    Join Date
    Aug 2012
    Posts
    8
    the control is a seicos LY it has a yasnac controller and no alar5m display's om the screen, only a red light on the board where thers a question mark button,can i send you pictures of the control?.
    thanks
    ernie

  8. #8
    Join Date
    Aug 2012
    Posts
    164
    Yes, you can send me a pic to: [email protected]

  9. #9
    Join Date
    Aug 2012
    Posts
    8
    pic's are sent,,,,also the spindle is very hard to turn, I removed the v belts to see if motor was lock and no it spins by hand, so as soon as i push the spindle button I get the red light on controler,, see picture....
    thanks

  10. #10
    Join Date
    Aug 2012
    Posts
    8
    hello

    still need hel with elec schems,, any takers?
    thanks

  11. #11
    Join Date
    Dec 2009
    Posts
    539
    Ernie,
    what is it you need? I have the electrical diagram, but what control do you have? And what alarms?

    John

  12. #12
    Quote Originally Posted by cncts11 View Post
    Yes, you can send me a pic to: [email protected]
    Dear Kevin
    I need the parameters of hitachi seiki HT20s iii turnning machine .
    Can you help me too?
    Yours sincerely
    Majid

  13. #13
    Join Date
    Dec 2009
    Posts
    539

    Re: hitachi seiki ht20s iii

    Quote Originally Posted by MAJIDTAERKAZEMY View Post
    Dear Kevin
    I need the parameters of hitachi seiki HT20s iii turnning machine .
    Can you help me too?
    Yours sincerely
    Majid
    Send me a message with your email and I will assist

    John


    Sent from my iPhone using Tapatalk

Similar Threads

  1. Did Mori Seiki Buy Hitachi Seiki?
    By Billet Sean in forum Mori Seiki lathes
    Replies: 6
    Last Post: 05-05-2011, 04:12 AM
  2. Hitachi seiki 5ne
    By lapman in forum Community Club House
    Replies: 0
    Last Post: 09-16-2010, 06:27 PM
  3. Hitachi Seiki
    By jsp973 in forum Mori Seiki lathes
    Replies: 2
    Last Post: 04-21-2008, 07:34 PM
  4. Hitachi Seiki HT 20
    By besc in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 03-31-2008, 03:19 PM
  5. Hitachi Seiki
    By cre8tunes in forum Community Club House
    Replies: 0
    Last Post: 11-18-2006, 02:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •