[Gweikelasers]

G.WEIKE 2MM METAL CUTTING MACHINE

--------------------------------------------------------------------------------

*RECI w6 laser tube(the best quality one chosen from hundred of tubes)
*Japan Panasonic & SANYO servo motor
*imported ball-screw and linear-guiding
*double ball-screw for y axis
*Auto height
*American Imported mirrors &focus lens
*lens water colling system
*cheapest thin metal cutting machine
*low operation cost
*1313,1390S,1325,1530

Applicable materials: ss & steel thin sheet less than 2 mm, nonmetal material as 1-25mm acrylic, 1-15mm wood
Speed:3m/s for metal cutting

Contacts:

G.Weike Laser
[email protected]

Melody
Sales Manager

[Gweikelasers]

Pictures

[fixtureman1]

It looks like quality control is missing. I see in picture 3 there are drink bottles sitting on the lasers that would scare me as to what would happen if one spilled into the unit.

[Gweikelasers]

Hi,fixtureman,

Thank you for your attention to this post

You are very careful. But in fact No.3 picutre was taken when we are preparing for the exhibition. No machines were started then.

[brian257]

Price?

[fixtureman1]

Hi,fixtureman,

Thank you for your attention to this post

You are very careful. But in fact No.3 picutre was taken when we are preparing for the exhibition. No machines were started then.

Where was the trade show I do a lot of shows and know there is a large one in Las Vagas. I did a lot for a company you may be familiar with Bystronics.

[salukikev]

Price?

Also interested- would love to know the price. I'd like a similar spec/capability in a smaller scale unit suitable for a home-shop.

[Gweikelasers]

Hi,

You can e-mail to us if you have interest. Forum is not a place to make price public.

[esmondperry]

I wish to do this...
I wish to get the price of the laser machines...

[esmondperry]

I wish to do this...
I wish to get the price of the laser machines...