I am retrofitting my EMCO Turn 120P and have no use for these boards. I know some people will need them.
Unfortunately I cannot guarantee that they are working as I do not have 3phase power and did not test the controller prior to dis-assembly.
I bought the machine from my university where it has been in storage for many years (they have bigger CNC machines in use), the machine looks like it has barely been used. (minimal scratches and shavings in the machine, also the tool changer only has one clamp marking)
What I did notice is that the motherboard has some of the traces re-soldered, and the motor control board was lose. Only fitted with one screw, so the PCB is slightly warped. Everything else look as new still (the machine is from 1987).
If you need any of the boards please post here or pm me, I will find out the shipping cost.
This is what I have for sale:
2x Shrittmotor R3D413000 80 USD each
Axiscontroller R3D14001 20 USD
Controlle Netzteil R3D436001 20 USD
Datacontroller R3D415000 20 USD
Machineninterface R3D425001 20 USD
Motherboard/s 5 USD
Motor Driver Board A7B418000 (tool turret board) 10 USD
Phasenschnittstellung R3D417000 20 USD
Regelkarte A7B416000 20 USD
Spindle Control R3D420010 10 USD
Videocarte R3D419000 20 USD
CRT Screen 20 USD
Or take the lot for 300 USD