Hi Everybody!

Now that I have my two new lathes installed in the shop, I need to install the 10TF and the 0T Model C controls.

I'm gonna start with the 0T Model C control first, then assemble the 10TF.

I was wondering if any of you could help me finish the parameter list I put together for the 0T Model C. Then I will need help with setting up a basic ladder.

I have the 9" Full Keyboard CRT/MDI and the Full Keyboard Operator Panel.

I can send the machine specifications along with a complete list of all the FANUC hardware used in my installation but essentially the lathes they resemble the Mori Seiki SL- type lathes (although a bit smaller) of the 1980's and have 8 tool/station turrets by Duplomatic, but actually thinking about using another mfg's turret. They both fit in a 24'x36' space quite nicely.

Thanks