Hey Tom,
My KFLOP suddenly "lost connection" while running a rotary table via my kstep driver. I thought maybe the USB had "wiggled" or something, but now when I plug it into the USB slot I get an error saying "the USB device attached to this computer has malfunctioned....". I attempted the "Recovery" in the KMotion Config & Flash; however, I suspect this was not designed for USB recovery....What do I need to do?
I guess the Good news is I can run the rotary table using a uController for the step train to finish this project, but the bad news is that I won't be able to use my router till I get my kflop fixed. If there is a way to flash it via USART, SPI, TWI or JTAG I am more than willing to give it a try.
Thanks in Advance!
Hunter