584,837 active members*
5,677 visitors online*
Register for free
Login

Thread: Meldas 60

Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2012
    Posts
    4

    Meldas 60

    Hi, anyone knows how to show for the Z axis the value related to the tip of the tool instead of the spindle nose one that I'm getting now?
    Thanks

  2. #2
    Join Date
    Jan 2011
    Posts
    0
    If you have the M60 Handbook, reference
    the following parameters:

    #1221 bit 7
    #1287 bits 3-7

    You can also look at parameter #1137 for
    counter selections on the coordinate screen

Similar Threads

  1. Meldas L0A
    By F.O.X in forum Mitsubishi controls
    Replies: 6
    Last Post: 05-21-2012, 07:41 PM
  2. meldas YM 2B
    By cadcamsolutions in forum Mazak, Mitsubishi, Mazatrol
    Replies: 4
    Last Post: 08-04-2009, 02:06 AM
  3. Meldas-m60
    By CHANDRU in forum Mazak, Mitsubishi, Mazatrol
    Replies: 4
    Last Post: 04-17-2008, 02:44 PM
  4. help with meldas mo
    By ToolC in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 02-09-2007, 04:55 PM
  5. DNC for Meldas
    By hpowell in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 04-06-2004, 07:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •