584,841 active members*
4,264 visitors online*
Register for free
Login

Thread: Anilam 1100M

Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2010
    Posts
    84

    Anilam 1100M

    Hi Guys,

    I just converted my BP knee mill from Anilam 1100M controls to LinuxCNC and Mesa 5i25 + 7i77 hardware. The Anilam controls were working perfect when I pulled the plug so if anyone is trying to keep an Anilam 1100M running and is looking for spares let me know.

    I have the monitor assembly, the computer, the relay board, the I/O board and the power supplies for the boards.

    John

  2. #2
    Join Date
    Oct 2011
    Posts
    1

    Re: Anilam 1100M

    Hey John,

    Know what the pin out is for the anilam servos?

Similar Threads

  1. Anilam 1100M passwords
    By edbanks in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 03-01-2014, 10:48 PM
  2. Anilam 1100M pinouts
    By actionman in forum Controller & Computer Solutions
    Replies: 6
    Last Post: 03-05-2013, 12:53 AM
  3. Anilam 1100m software
    By BenSteigerwald in forum Controller & Computer Solutions
    Replies: 6
    Last Post: 04-01-2012, 09:38 PM
  4. anilam 1100m
    By pmesilver in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 06-01-2011, 06:05 PM
  5. Converting Anilam 1100m to mach 3
    By BillsBoatRepair in forum Mach Mill
    Replies: 1
    Last Post: 07-23-2009, 03:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •