502,625 active members
5,659 visitors online
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Registered
    Join Date
    Nov 2005
    Posts
    23

    Delrin spur and bevel gears

    I need to know if anyone has the ablitly to cut 48 pitch spur gears. If so, I would need a bunc hof delrin gears made. I could even supply the delrin. The gears would prolly range from 40tooth to 60 tooth gears. Also if anyone can cut bevel gears, contact me.

    Contact me at Admin@crazyPhantom.com or PM me here.

    Thanks,
    Joe

  2. #2
    Registered
    Join Date
    Mar 2004
    Posts
    757
    I just Googled a bunch of sources for delrin spur and bevel gears. Is this a custom job?
    Wayne Hill

  3. #3
    Registered
    Join Date
    Nov 2005
    Posts
    23
    can you give me a link to one?

  4. #4

  5. #5
    Registered
    Join Date
    Mar 2003
    Posts
    19

    gears.....

    Hello ,the machine shop I work at can cut your gears ,here is a link to our web page http://www.roemachine.com/ thanks ,Tim

  6. #6
    Registered
    Join Date
    Nov 2005
    Posts
    23
    is that the same people that do work for orange county choppers?

  7. #7
    Registered
    Join Date
    Mar 2003
    Posts
    19

    Gears

    Dont ,I wish! Nope ,sorry we are in the midwest Omaha,Ne.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •