584,802 active members*
4,983 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Sep 2012
    Posts
    0

    TNC 360 heidenhain parameters lost

    Hello All.

    I have got a old Lagun Mill whit a tnc 360 heidenhain controller. Now i am trying to get my computer to send to the mill. But i have lost the parameters 1510, 1510.0 and 1510.1, and when i look in the books i cant find them, it just say's 0 - 32000, do i just pick a number my self or what? I really hope you can help me. And sorry fore my english.

    Best regards Michael Simonsen, Denmark.

  2. #2
    Join Date
    Aug 2015
    Posts
    2

    Re: TNC 360 heidenhain parameters lost

    Hi Michael

    This is my 1st post so hope it works. I have a TNC 360 heidenhain controller on a Union horizontal borer. The parameter list I have for the TNC 360 doesn't have "1510" but has 1510.0, 1510.1, 1510.2, and 1510.3 These parameters are for feed pre-control for the 4 AXIS. Input for these are from "0.1 to 10" Try setting these to 1 . it works on mine. PS I have a bigger problem at the moment with my control. The PLC program was wiped and the backup lost. Can anyone tell me if a PLC progrom of a similar machine will work. Even if I had to re EDIT it would be better than what I have Know.
    Regard's Gary
    Quote Originally Posted by Fætteren View Post

    Hello All.

    I have got a old Lagun Mill whit a tnc 360 heidenhain controller. Now i am trying to get my computer to send to the mill. But i have lost the parameters 1510, 1510.0 and 1510.1, and when i look in the books i cant find them, it just say's 0 - 32000, do i just pick a number my self or what? I really hope you can help me. And sorry fore my english.

    Best regards Michael Simonsen, Denmark.

  3. #3

    Re: TNC 360 heidenhain parameters lost

    Hello Michael! I am danish too.
    I have also got an old lagun mill with a Heidenhain 360 TNC control. I can't get mine to connect with the computer - tried literally all cables, adapters, pci express.. everything. It says no response from TNC.
    Could you give me a smart tip? I would appreciate it a lot!
    I can provide you the parameters, if that is still a problem after all this time (2012)
    Venlig hilsen Andreas Faurholdt.

  4. #4

    Re: TNC 360 heidenhain parameters lost

    Hello Faurholdt,
    I have a Lagun V with tnc 360 and I lost the parameters, is it possible to send it to me?
    Thanks

  5. #5
    Join Date
    Sep 2012
    Posts
    215

    Re: TNC 360 heidenhain parameters lost

    Quote Originally Posted by Faurholdt View Post
    Hello Michael! I am danish too.
    I have also got an old lagun mill with a Heidenhain 360 TNC control. I can't get mine to connect with the computer - tried literally all cables, adapters, pci express.. everything. It says no response from TNC.
    Could you give me a smart tip? I would appreciate it a lot!
    I can provide you the parameters, if that is still a problem after all this time (2012)
    Venlig hilsen Andreas Faurholdt.
    Did you ever get this sorted. I have the same problem. Have been trying for a long time on and off to connect but still no luck
    Regards Bob

  6. #6
    Join Date
    Sep 2012
    Posts
    215

    Re: TNC 360 heidenhain parameters lost

    Just for anyone interested i finally managed to connect to cnc but not with Heidenhain TNC Remo or server. I tried Easy dnc remo and used 3 wire cable and works fine. Tried TNC Remo and server again and no go so obviously there is something wrong with settings somewhere but i have no idea where. I have tried all sorts. Looks like i might end up buying Remo DNC
    Regards Bob

Similar Threads

  1. Replies: 3
    Last Post: 05-31-2022, 11:50 AM
  2. Heidenhain TNC 415 parameters lost?
    By yuem in forum Controller & Computer Solutions
    Replies: 3
    Last Post: 12-06-2016, 12:00 PM
  3. Parameters lost
    By padams in forum Want To Buy...Need help!
    Replies: 1
    Last Post: 05-18-2010, 02:09 AM
  4. Lost parameters
    By kangarabbit in forum Fanuc
    Replies: 3
    Last Post: 03-08-2009, 07:42 PM
  5. Lost parameters on 10T
    By ktb100 in forum Fanuc
    Replies: 0
    Last Post: 03-29-2007, 06:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •