584,866 active members*
5,026 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2009
    Posts
    7

    Dyna 3000 Lathe

    Lathe was shutdown for a few months and when it was turned back on the control wouldn't boot up. The LCD display just says "Display working!". You can press the buttons on the keypad and it will beep, but the lathe doesn't respond. Is there a battery inside the control?

  2. #2
    Join Date
    Feb 2008
    Posts
    243
    Did you get it fixed?
    Dan

  3. #3
    Join Date
    Feb 2014
    Posts
    1
    What did you do?
    please share your info
    thanks

  4. #4
    Join Date
    Jun 2009
    Posts
    7
    Machine is still down. I posted for a friend who owns the machine and he has not tried to use it since.

Similar Threads

  1. dyna myte 3000 lathe
    By davidponte in forum Dyna Mechtronics
    Replies: 0
    Last Post: 01-27-2013, 04:50 AM
  2. dyna myte 3000 lathe
    By davidponte in forum Dyna Mechtronics
    Replies: 6
    Last Post: 04-15-2011, 05:02 PM
  3. Dyna 3000 lathe software
    By johanzwart in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 5
    Last Post: 08-17-2010, 02:56 PM
  4. New to CNC Zone. Need help with a dyna 3000 lathe
    By taproot in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 10-11-2008, 08:49 PM
  5. Retrofit a Dyna 3000 Lathe
    By starlight in forum Open Source CNC Machine Designs
    Replies: 0
    Last Post: 05-07-2008, 12:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •