584,812 active members*
5,395 visitors online*
Register for free
Login
Page 2 of 2 12
Results 21 to 24 of 24
  1. #21
    Join Date
    Mar 2014
    Posts
    7

    Re: Connect PC to Fagor 8055

    this not Work for me

    Simplified connection is 2 to 3, 3 to 2, 5 to 5 and on each subD connection jump 4, 6, and 8 together. This will work for all 8055 controls (except for Eprom style, very old 8055 that came out right after the 8050)
    -----------------------------------------------------------------------------------------------------------------
    this Works on my 8055 tc control whit Eprom --- I am happy now .. remeber hit initalize softkey

    for 8055 with eprom or 8050 and older cnc fagor controls, the pin out is 2 to 2; 3 to 3; 5(pc)to 7(cnc); at cnc side join 5-6-9; at pc side join 8-6-4.
    set serial comunication parameters to their default value (hit initialize softkey) or try the comunication with windnc at 9600boudrate

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------

    for 8055 eprom series or 8055 and older cnc fagor controls, the cable pinout is 2 to 2; 3 to 3; 5(pc) to 7(cnc); join 4-6-8 at pc side; join 5-6-9 at cnc side;
    try thye comunication at 9600 baudrate all other parameter to default.

    kind regards

  2. #22
    Join Date
    Mar 2014
    Posts
    7

    Re: Connect PC to Fagor 8055

    Quote Originally Posted by rui.orfao View Post
    hi
    for 8055 eprom series or 8055 and older cnc fagor controls, the cable pinout is 2 to 2; 3 to 3; 5(pc) to 7(cnc); join 4-6-8 at pc side; join 5-6-9 at cnc side;
    try thye comunication at 9600 baudrate all other parameter to default.

    kind regards
    i am happy now it´s Works whit windnc 9600 baud . :banana:

  3. #23
    Join Date
    Aug 2011
    Posts
    2

    Re: Connect PC to Fagor 8055

    Hi, Greatings from Portugal
    Need help with ethernet communication on windows 7
    Thanks

  4. #24
    Join Date
    Jun 2006
    Posts
    143

    Re: Connect PC to Fagor 8055

    Instructions I got for setting our 8055 up

    TCP/IP HARD DISK & ETHERNET SETUP
    FAGOR 8055
    ( Direct to a PC using a crossover cable )
    ( The IP addresses used are for example purposes only, other IP addresses may be used )

    CNC PARAMETERS

    P1 = 0
    P2 = FAGORCNC (ANY NAME TO IDENTIFY THE HARD DISK)
    P22 = 1 (Sets communications to RS232/Serial 2 and Ethernet , disables RS422)
    P24 ( DIRIP ) = 10.1.1.2 ( IP Address of the CNC )
    P25 ( NetMask ) = 255.255.255.0 ( Must be set in PC as Subnet Mask )
    P26 ( IPGateway ) = 10.1.1.1 ( IP Address of the PC ) or ( IP Address of the Server )
    P27 ( IPSWDNC ) = 10.1.1.1 ( IP Address of the PC the CNC will use for DNC )


    WINDOWS XP SETTINNGS

    1. CLICK ON “Control Panel”
    2. CLICK ON “Network Connections”
    3. CLICK ON “Local Area Connection”
    4. CLICK ON “Internet Protocol(TCP/IP)”
    5. CLICK ON “Properties”
    6. CLICK ON “Use the following IP address”
    7. Enter in the IP Adress “ 10.1.1.1
    8. Enter the Subnet mask “ 255.255.255.0 “
    9. CLICK ON “OK”

    To Drag and Drop files from PC to CNC

    1. Open “WINDOWS EXPLORER”
    2. In the ADDRESS line type in FTP://10.1.1.2
    3. CLICK ON “Disk”
    4. CLICK ON “prg”
    ( This will bring up a list of the programs in the CNC )
    To create a shortcut on the DESKTOP of your PC
    1. CLICK ON the icon in the address bar of explorer that is right before the ftp://10.1.1.2 that
    you previously typed in , drag that to your desk top and drop it.

    WINDNC 4.0 (and higher) Connection
    In SETUP -
    1. Double Click the TYPE window and select “NETWORK NODE”
    2. Connect on Startup – double click the box to enter “X”
    3. Double Click the IP ADDRESS window and type in “10.1.1.2”

    ( This allows the WinDNC program to send and receive files just as if a serial cable were connected, just MUCH faster.)

Page 2 of 2 12

Similar Threads

  1. fagor 8055 tc
    By trarus in forum Fagor Automation
    Replies: 6
    Last Post: 01-19-2019, 06:17 PM
  2. Fagor 8055 G 54??
    By clayman in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 08-19-2013, 06:29 PM
  3. fagor 8055
    By cncsed in forum Fagor Automation
    Replies: 9
    Last Post: 09-06-2011, 02:21 AM
  4. Fagor 8055 DNC communication
    By theartz in forum Fagor Automation
    Replies: 1
    Last Post: 01-12-2011, 11:13 PM
  5. HELP POSTING TO FAGOR 8055
    By rough_cut in forum Fagor Automation
    Replies: 2
    Last Post: 04-21-2010, 02:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •