[hawaii50]

hey guys im new and i need help with a plasmacam. the machine is not inisulizing please help.

[AmesMFG]

That's easy man!

1. Hit the Auto Detect machine button.
2. Make sure that "Cutting Control" is on "auto" (there is a button on the control box with a yellow LED that lights up when it is on).
3. Then go to hit the initialize button.

Make sure to take advantage of the video manual that comes already in-bedded into the software. It is an awesome tool when you are learning to use the machine because you can follow the steps while you have the software open.

Make sure to call the tech guys at 719-676-2701 if you need additional help and they can walk it through with you.

Also feel free to PM me if need any additional help.

-Richard