Hai
I need to disable W and B axis while doing some machining operation is under progress,
Let me know the procedure to axis disable and enabling in fanuc 31i model A5
Thank
SRIMURTHY
Hai
I need to disable W and B axis while doing some machining operation is under progress,
Let me know the procedure to axis disable and enabling in fanuc 31i model A5
Thank
SRIMURTHY
do W and B axis have a clamp code ?
any axis with a clamp code is automaticaly disabled during clamping.
naturally the mechanic's need to exist and be electrically controlable(at least detectable), then
pmc changes is requiered for an axis without clamping function prepared beforehand, best to consult the MTB 1st.