584,830 active members*
5,599 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2004
    Posts
    19

    Wink Thanks John!!

    Wanted to say thanks to John for all the help this week with configuring my new spindle motor! I added a commercially available vfc and 3 phase motor.
    John spent 2hrs on 2 separate evenings with me helping pin out and configure the vfd-cnc4pc pwm breakout card.

  2. #2
    Join Date
    Aug 2008
    Posts
    400

    NM-145 Spindle upgrade KIT

    Patrick,

    I am glad to see the integration of Shadowspawn's AC spindle motor upgrade KIT is working well. Shadowspawn's shop was hit by Hurricane Sandy last week and has caused his electrical and internet services to be interrupted. As a result we were very happy to assist in integrated his KIT into the NM-145. Our support team will continue to provide assistance as required.

    It was a pleasure to be of assistance to get you up and running.

    Regards,
    John

Similar Threads

  1. Thanks John at Novakon
    By ram48 in forum Novakon
    Replies: 0
    Last Post: 11-01-2012, 08:00 PM
  2. Hello everybody, I'm Tyruss aka John
    By TYRUSS in forum Australia, New Zealand Club House
    Replies: 0
    Last Post: 11-14-2010, 11:58 PM
  3. Hi ! John!
    By HAO MAU in forum Novakon
    Replies: 1
    Last Post: 05-21-2010, 06:16 PM
  4. Hi to everyone i am john!
    By ion the gr in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 06-04-2007, 09:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •