dear all
i need help please
for my china maxicam machine " maxi -s -1530 servo motor spindle 4.5Kw with DSP hand
x,y and z moved well the spindle doesn't work "turn "
nothing show on the screen of the delta interver
dear all
i need help please
for my china maxicam machine " maxi -s -1530 servo motor spindle 4.5Kw with DSP hand
x,y and z moved well the spindle doesn't work "turn "
nothing show on the screen of the delta interver
Did you check if wire connected very well between spindle and Delta inverter?
Amanda Cheung from OMNI, www.omni-cnc.com,
[email protected], Skype: omni-cnc
check power to the inverter, there is an overload in the panel, reset this.
Ex Emach Service Engineer, contact me for assistance.
hi my freinds thank you for your help the problem it was in the wire connection but please now i have problem my spindle it doesn't turn correctly the problem in the parametre seting P00 AND P01 AND P07 FOR THE SERVO MOTER HD 4.5 KW