Before I start hooking things up and burning things, I decided to check with you guys if you can provide some tips and help. I would also like to make a visual documentation to help people like me in dire with their CNC hobbies.
I recently purchased Huanyang 2.2kw VFD with its corresponding spindle.
As an added benefit, I also wanted Mach3 to control the speed of the VFD.
Searching the net and ebay I stumbled across PWM: PWM Signal to DC Voltage Conversion Board for Speed Control of Spindle CM112 New | eBay
I also have this BOB:
CNC 6 Axis DB25 Breakout Board Interface Adapter Mach3 KCAM4 EMC2 DB25 Cable | eBay
My question would be: How do I wire "hook up" wires from BOB to PWM and PWM to VFD?
Has anyone got this particular PWM?
Thread: Huanyang 2.2kw VFD PWM Mach3
Results 1 to 1 of 1
-
11-14-2012, 02:31 PM #1
Registered
- Join Date
- Feb 2009
- Posts
- 2
Huanyang 2.2kw VFD PWM Mach3
Reply With QuoteSimilar Threads
-
Connecting Huanyang VFD to Mach3 via Gecko 540
By Vaffel in forum Spindles / VFDReplies: 69Last Post: 01-07-2015, 10:51 PM -
What size Pot for a 2.2Kw Huanyang
By uspl in forum Phase ConvertersReplies: 8Last Post: 07-23-2012, 09:33 AM -
huanyang; a different question!
By Mocha in forum Phase ConvertersReplies: 1Last Post: 03-21-2012, 09:55 AM -
Using a Huanyang VFD 3HP 2.2KW 10A with a 3hp 1500rpm FAN?
By dkGoodrich.com in forum Phase ConvertersReplies: 0Last Post: 02-07-2012, 05:00 AM -
Huanyang HY02D223B goes POP!
By stevespo in forum Phase ConvertersReplies: 1Last Post: 09-26-2009, 08:12 PM
Posting Permissions
