[bbrreid]

Can anyone please help with my Puma 6 lathe serial No.310088 with Fanuc 3T
the machine was in storage before I bought it and the company who owned it no longer trading. I need the parameter list to get the machine working.
I have 6T and 0T maintenance manuals but I dont suppose the parameter list from these will work or can some be used just to check if the Hydraulics come on etc.
Thanks

[fordav11]

this thread has a parameter list for 3T......
http://www.cnczone.com/forums/fanuc/...anuc_3t-d.html

[bbrreid]

this thread has a parameter list for 3T......
http://www.cnczone.com/forums/fanuc/...anuc_3t-d.html

Thank you very much for taking the time to do this
Best Regards
Brian

[fordav11]

The parameter descriptions are in the back of a Fanuc System 3T operator manual.
If you don't have the manual and can't get your machine working with those other parameters let me know and I'll scan the parameter descriptions and settings pages from my manual (15 pages)

[bbrreid]

Thank you that would be very helpful as the photo of the param. is not very clear and the first 3 are missing
Regards
Brian

[fordav11]

many of the parameters are missing from the manual including the first 3 which I believe are the option parameters. it says any unlisted parameters should be 0.
just try what is there and see how you go first......

[bbrreid]

many of the parameters are missing from the manual including the first 3 which I believe are the option parameters. it says any unlisted parameters should be 0.
just try what is there and see how you go first......

Thank you, will do

[bbrreid]

Thanks to everyone especially FORDAV11 I now have most of the parameters I was looking for
still some little probs when I push the power button on the panel the hydraulic pump starts but stops when I take my finger off the button.
found these for the missing parameters

P1 10000000 Enable Z brake
P1 00010000 Enable Spindle start
P3 01000000 Macro Variables
P3 00010000 Menu Screen
P996 00001000 64 Offsets
P997 00010000 Clock and Parts Counter

also a little difference on parm. 0008 what ever that does

[fordav11]

ah yes. Al to the rescue again :-)
http://www.cnczone.com/forums/fanuc/...arameters.html

The Z brake is probably only for a Mill.

Parameter 8 relates to axis parameters for reference counter and multiplying ratio. Those will not fix your power-on issue but you should check the actual axis movement and compare to readout to ensure the amount of movement is the same.


I have scanned the Fanuc 3T parameter and alarm pages and I sent you a PM....

[bbrreid]

ah yes. Al to the rescue again :-)
http://www.cnczone.com/forums/fanuc/...arameters.html

The Z brake is probably only for a Mill.

Parameter 8 relates to axis parameters for reference counter and multiplying ratio. Those will not fix your power-on issue but you should check the actual axis movement and compare to readout to ensure the amount of movement is the same.


I have scanned the Fanuc 3T parameter and alarm pages and I sent you a PM....

Once again thank you for all the help and the scanned info it is getting me nearer to having the machine up and running