584,830 active members*
5,503 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2012
    Posts
    0

    partmaker swisscam question

    Currently using partmaker swisscam to program citizen machine. Just wandering how to go about programming part in pic I've attached. My main question is milling the 4 standing legs. Also would it be best to draw this in partmaker or import a solidworks file. Any help is appreciated.
    Attached Thumbnails Attached Thumbnails image.jpg  

  2. #2
    Join Date
    Dec 2008
    Posts
    54
    For the legs I would leave them heavy, then use our AMT to spiral down them following a tool path for the profile.

    Feel free to call into support and someone can help you look into the part further.
    Bill Cain
    www.partmaker.com

Similar Threads

  1. Partmaker
    By DLMACHINE in forum Uncategorised CAM Discussion
    Replies: 4
    Last Post: 07-12-2019, 02:30 PM
  2. Swisscam-trying to follow turn on an M20
    By MTrexer in forum Uncategorised CAM Discussion
    Replies: 4
    Last Post: 10-10-2012, 12:29 PM
  3. need programmer with Partmaker SE USA
    By BILL WRIGHT CCR in forum Employment Opportunity
    Replies: 0
    Last Post: 12-10-2011, 06:12 PM
  4. Anyone uses/used PartMaker software
    By WOLOG in forum Uncategorised CAM Discussion
    Replies: 1
    Last Post: 09-24-2010, 08:23 PM
  5. G65 and G74 in PartMaker SwissCAM
    By PACMan1779 in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 03-27-2009, 03:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •