[rodjava]

Hi,
We are cutting 100 straight tools paths that are 24" long in plexiglass. The material is .500 and I am routing down to .400 with a 1.00 dia 90 degree v bit. Cutting speed is 80 ipm.

Without creating 2 tool paths in each direction, Aspire will not allow cutting in both directions. I'm ok with this.

However, I would like a faster rapid when returning to beginning of each cut. I believe that it rapids back at the same 80 ipm cutting speeds.

What controls the rapid speed when not cutting?

Thanks in advance,

Rod

[ger21]

If they are G0 moves, then the machine control would control the speed. If they are G1 moves, then Aspire would. Can you post the g-code?

[rodjava]

Gerry,
I can post the gcode later today.
Thanks in advance for your help.
Rod

[rodjava]

HI Gerry,
First of all, thank you in advance for your assistance.
Here is the small segment of the tool path I mentioned.
Any help to explain how I can manage the rapids would be appreciated.

Rod

( v 360 horizontal )
( File created: Monday, November 19, 2012 - 07:54 PM)
( for Mach2/3 from Vectric )
( Material Size)
( X= 21.000, Y= 18.000, Z= 0.460)
()
(Toolpaths used in this file
(v 360 horizontal)
(Tools used in this file: )
(0 = V-Bit {90 deg 1 inches})
N100G00G20G17G90G40G49G80
N110G70G91.1
N120T0M06
N130 (V-Bit {90 deg 1 inches})
N140G00G43Z0.8000H0
N150S100M03
N160(Toolpath:- v 360 horizontal)
N170()
N180G94
N190X0.0000Y0.0000F189.0
N200G00X20.5406Y17.3526Z0.5000
N210G1Z-0.0360F118.1
N220G1X2.5406F189.0
N230G00Z0.5000
N240G00X20.5406
N250G1Z-0.0720F118.1
N260G1X2.5406F189.0
N270G00Z0.5000
N280G00X20.5406
N290G1Z-0.1080F118.1
N300G1X2.5406F189.0
N310G00Z0.5000
N320G00X20.5406
N330G1Z-0.1440F118.1
N340G1X2.5406F189.0
N350G00Z0.5000
N360G00X20.5406
N370G1Z-0.1800F118.1
N380G1X2.5406F189.0
N390G00Z0.5000
N400G00X20.5406
N410G1Z-0.2160F118.1
N420G1X2.5406F189.0
N430G00Z0.5000
N440G00X20.5406
N450G1Z-0.2520F118.1
N460G1X2.5406F189.0
N470G00Z0.5000
N480G00X20.5406
N490G1Z-0.2880F118.1
N500G1X2.5406F189.0
N510G00Z0.5000
N520G00X20.5406
N530G1Z-0.3240F118.1
N540G1X2.5406F189.0
N550G00Z0.5000
N560G00X20.5406
N570G1Z-0.3600F118.1
N580G1X2.5406F189.0
N590G00Z0.5000
N600G00X20.5406Y16.3426
N610G1Z-0.0360F118.1
N620G1X2.5406F189.0
N630G00Z0.5000
N640G00X20.5406
N650G1Z-0.0720F118.1
N660G1X2.5406F189.0
N670G00Z0.5000
N680G00X20.5406
N690G1Z-0.1080F118.1
N700G1X2.5406F189.0
N710G00Z0.5000
N720G00X20.5406
N730G1Z-0.1440F118.1
N740G1X2.5406F189.0
N750G00Z0.5000
N760G00X20.5406
N770G1Z-0.1800F118.1
N780G1X2.5406F189.0
N790G00Z0.5000
N800G00X20.5406
N810G1Z-0.2160F118.1
N820G1X2.5406F189.0
N830G00Z0.5000
N840G00X20.5406
N850G1Z-0.2520F118.1
N860G1X2.5406F189.0
N870G00Z0.5000
N880G00X20.5406
N890G1Z-0.2880F118.1
N900G1X2.5406F189.0
N910G00Z0.5000
N920G00X20.5406
N930G1Z-0.3240F118.1
N940G1X2.5406F189.0
N950G00Z0.5000
N960G00X20.5406
N970G1Z-0.3600F118.1
N980G1X2.5406F189.0
N990G00Z0.5000
N1000G00X20.5406Y16.0926
N1010G1Z-0.0360F118.1
N1020G1X2.5406F189.0
N1030G00Z0.5000
N1040G00X20.5406
N1050G1Z-0.0720F118.1
N1060G1X2.5406F189.0
N1070G00Z0.5000
N1080G00X20.5406
N1090G1Z-0.1080F118.1
N1100G1X2.5406F189.0
N1110G00Z0.5000
N1120G00X20.5406
N1130G1Z-0.1440F118.1
N1140G1X2.5406F189.0
N1150G00Z0.5000
N1160G00X20.5406
N1170G1Z-0.1800F118.1
N1180G1X2.5406F189.0
N1190G00Z0.5000
N1200G00X20.5406
N1210G1Z-0.2160F118.1
N1220G1X2.5406F189.0
N1230G00Z0.5000
N1240G00X20.5406
N1250G1Z-0.2520F118.1
N1260G1X2.5406F189.0
N1270G00Z0.5000
N1280G00X20.5406
N1290G1Z-0.2880F118.1
N1300G1X2.5406F189.0
N1310G00Z0.5000
N1320G00X20.5406
N1330G1Z-0.3240F118.1
N1340G1X2.5406F189.0
N1350G00Z0.5000
N1360G00X20.5406
N1370G1Z-0.3600F118.1
N1380G1X2.5406F189.0
N1390G00Z0.5000
N1400G00X20.5406Y15.0826
N1410G1Z-0.0360F118.1
N1420G1X2.5406F189.0
N1430G00Z0.5000
N1440G00X20.5406
N1450G1Z-0.0720F118.1
N1460G1X2.5406F189.0
N1470G00Z0.5000
N1480G00X20.5406
N1490G1Z-0.1080F118.1
N1500G1X2.5406F189.0
N1510G00Z0.5000
N1520G00X20.5406
N1530G1Z-0.1440F118.1
N1540G1X2.5406F189.0
N1550G00Z0.5000
N1560G00X20.5406
N1570G1Z-0.1800F118.1
N1580G1X2.5406F189.0
N1590G00Z0.5000
N1600G00X20.5406
N1610G1Z-0.2160F118.1
N1620G1X2.5406F189.0
N1630G00Z0.5000
N1640G00X20.5406
N1650G1Z-0.2520F118.1
N1660G1X2.5406F189.0
N1670G00Z0.5000
N1680G00X20.5406
N1690G1Z-0.2880F118.1
N1700G1X2.5406F189.0
N1710G00Z0.5000
N1720G00X20.5406
N1730G1Z-0.3240F118.1
N1740G1X2.5406F189.0
N1750G00Z0.5000
N1760G00X20.5406
N1770G1Z-0.3600F118.1
N1780G1X2.5406F189.0
N1790G00Z0.5000
N1800G00X20.5406Y14.8326
N1810G1Z-0.0360F118.1
N1820G1X2.5406F189.0
N1830G00Z0.5000
N1840G00X20.5406
N1850G1Z-0.0720F118.1
N1860G1X2.5406F189.0
N1870G00Z0.5000
N1880G00X20.5406
N1890G1Z-0.1080F118.1
N1900G1X2.5406F189.0
N1910G00Z0.5000
N1920G00X20.5406
N1930G1Z-0.1440F118.1
N1940G1X2.5406F189.0
N1950G00Z0.5000
N1960G00X20.5406
N1970G1Z-0.1800F118.1
N1980G1X2.5406F189.0
N1990G00Z0.5000
N2000G00X20.5406
N2010G1Z-0.2160F118.1
N2020G1X2.5406F189.0
N2030G00Z0.5000
N2040G00X20.5406
N2050G1Z-0.2520F118.1
N2060G1X2.5406F189.0
N2070G00Z0.5000
N2080G00X20.5406
N2090G1Z-0.2880F118.1
N2100G1X2.5406F189.0
N2110G00Z0.5000
N2120G00X20.5406
N2130G1Z-0.3240F118.1
N2140G1X2.5406F189.0
N2150G00Z0.5000
N2160G00X20.5406
N2170G1Z-0.3600F118.1
N2180G1X2.5406F189.0
N2190G00Z0.5000
N2200G00X20.5406Y13.8226
N2210G1Z-0.0360F118.1
N2220G1X2.5406F189.0
N2230G00Z0.5000
N2240G00X20.5406
N2250G1Z-0.0720F118.1
N2260G1X2.5406F189.0
N2270G00Z0.5000
N2280G00X20.5406
N2290G1Z-0.1080F118.1
N2300G1X2.5406F189.0
N2310G00Z0.5000
N2320G00X20.5406
N2330G1Z-0.1440F118.1
N2340G1X2.5406F189.0
N2350G00Z0.5000
N2360G00X20.5406
N2370G1Z-0.1800F118.1
N2380G1X2.5406F189.0
N2390G00Z0.5000
N2400G00X20.5406
N2410G1Z-0.2160F118.1
N2420G1X2.5406F189.0
N2430G00Z0.5000
N2440G00X20.5406
N2450G1Z-0.2520F118.1
N2460G1X2.5406F189.0
N2470G00Z0.5000
N2480G00X20.5406
N2490G1Z-0.2880F118.1
N2500G1X2.5406F189.0
N2510G00Z0.5000
N2520G00X20.5406
N2530G1Z-0.3240F118.1
N2540G1X2.5406F189.0
N2550G00Z0.5000
N2560G00X20.5406
N2570G1Z-0.3600F118.1
N2580G1X2.5406F189.0
N2590G00Z0.5000
N2600G00X20.5406Y13.5726
N2610G1Z-0.0360F118.1
N2620G1X2.5406F189.0
N2630G00Z0.5000
N2640G00X20.5406
N2650G1Z-0.0720F118.1
N2660G1X2.5406F189.0
N2670G00Z0.5000
N2680G00X20.5406
N2690G1Z-0.1080F118.1
N2700G1X2.5406F189.0
N2710G00Z0.5000
N2720G00X20.5406
N2730G1Z-0.1440F118.1
N2740G1X2.5406F189.0
N2750G00Z0.5000
N2760G00X20.5406
N2770G1Z-0.1800F118.1
N2780G1X2.5406F189.0
N2790G00Z0.5000
N2800G00X20.5406
N2810G1Z-0.2160F118.1
N2820G1X2.5406F189.0
N2830G00Z0.5000
N2840G00X20.5406
N2850G1Z-0.2520F118.1
N2860G1X2.5406F189.0
N2870G00Z0.5000
N2880G00X20.5406
N2890G1Z-0.2880F118.1
N2900G1X2.5406F189.0
N2910G00Z0.5000
N2920G00X20.5406
N2930G1Z-0.3240F118.1
N2940G1X2.5406F189.0
N2950G00Z0.5000
N2960G00X20.5406
N2970G1Z-0.3600F118.1
N2980G1X2.5406F189.0
N2990G00Z0.5000
N3000G00X20.5406Y12.5626
N3010G1Z-0.0360F118.1
N3020G1X2.5406F189.0
N3030G00Z0.5000
N3040G00X20.5406
N3050G1Z-0.0720F118.1
N3060G1X2.5406F189.0
N3070G00Z0.5000
N3080G00X20.5406
N3090G1Z-0.1080F118.1
N3100G1X2.5406F189.0
N3110G00Z0.5000
N3120G00X20.5406
N3130G1Z-0.1440F118.1
N3140G1X2.5406F189.0
N3150G00Z0.5000
N3160G00X20.5406
N3170G1Z-0.1800F118.1
N3180G1X2.5406F189.0
N3190G00Z0.5000
N3200G00X20.5406
N3210G1Z-0.2160F118.1
N3220G1X2.5406F189.0
N3230G00Z0.5000
N3240G00X20.5406
N3250G1Z-0.2520F118.1
N3260G1X2.5406F189.0
N3270G00Z0.5000
N3280G00X20.5406
N3290G1Z-0.2880F118.1
N3300G1X2.5406F189.0
N3310G00Z0.5000
N3320G00X20.5406
N3330G1Z-0.3240F118.1
N3340G1X2.5406F189.0
N3350G00Z0.5000
N3360G00X20.5406
N3370G1Z-0.3600F118.1
N3380G1X2.5406F189.0
N3390G00Z0.5000
N3400G00X20.5406Y12.3126
N3410G1Z-0.0360F118.1
N3420G1X2.5406F189.0
N3430G00Z0.5000
N3440G00X20.5406
N3450G1Z-0.0720F118.1
N3460G1X2.5406F189.0
N3470G00Z0.5000
N3480G00X20.5406
N3490G1Z-0.1080F118.1
N3500G1X2.5406F189.0
N3510G00Z0.5000
N3520G00X20.5406
N3530G1Z-0.1440F118.1
N3540G1X2.5406F189.0
N3550G00Z0.5000
N3560G00X20.5406
N3570G1Z-0.1800F118.1
N3580G1X2.5406F189.0
N3590G00Z0.5000
N3600G00X20.5406
N3610G1Z-0.2160F118.1
N3620G1X2.5406F189.0
N3630G00Z0.5000
N3640G00X20.5406
N3650G1Z-0.2520F118.1
N3660G1X2.5406F189.0
N3670G00Z0.5000
N3680G00X20.5406
N3690G1Z-0.2880F118.1
N3700G1X2.5406F189.0
N3710G00Z0.5000
N3720G00X20.5406
N3730G1Z-0.3240F118.1
N3740G1X2.5406F189.0
N3750G00Z0.5000
N3760G00X20.5406
N3770G1Z-0.3600F118.1
N3780G1X2.5406F189.0
N3790G00Z0.5000
N3800G00X20.5406Y11.3026
N3810G1Z-0.0360F118.1
N3820G1X2.5406F189.0
N3830G00Z0.5000
N3840G00X20.5406
N3850G1Z-0.0720F118.1
N3860G1X2.5406F189.0
N3870G00Z0.5000
N3880G00X20.5406
N3890G1Z-0.1080F118.1
N3900G1X2.5406F189.0
N3910G00Z0.5000
N3920G00X20.5406
N3930G1Z-0.1440F118.1
N3940G1X2.5406F189.0
N3950G00Z0.5000
N3960G00X20.5406
N3970G1Z-0.1800F118.1
N3980G1X2.5406F189.0
N3990G00Z0.5000
N4000G00X20.5406
N4010G1Z-0.2160F118.1
N4020G1X2.5406F189.0
N4030G00Z0.5000
N4040G00X20.5406
N4050G1Z-0.2520F118.1
N4060G1X2.5406F189.0
N4070G00Z0.5000
N4080G00X20.5406
N4090G1Z-0.2880F118.1
N4100G1X2.5406F189.0
N4110G00Z0.5000
N4120G00X20.5406
N4130G1Z-0.3240F118.1
N4140G1X2.5406F189.0
N4150G00Z0.5000
N4160G00X20.5406
N4170G1Z-0.3600F118.1
N4180G1X2.5406F189.0
N4190G00Z0.5000
N4200G00X20.5406Y11.0526
N4210G1Z-0.0360F118.1
N4220G1X2.5406F189.0
N4230G00Z0.5000
N4240G00X20.5406
N4250G1Z-0.0720F118.1
N4260G1X2.5406F189.0
N4270G00Z0.5000
N4280G00X20.5406
N4290G1Z-0.1080F118.1
N4300G1X2.5406F189.0
N4310G00Z0.5000
N4320G00X20.5406
N4330G1Z-0.1440F118.1
N4340G1X2.5406F189.0
N4350G00Z0.5000
N4360G00X20.5406
N4370G1Z-0.1800F118.1
N4380G1X2.5406F189.0
N4390G00Z0.5000
N4400G00X20.5406
N4410G1Z-0.2160F118.1
N4420G1X2.5406F189.0
N4430G00Z0.5000
N4440G00X20.5406
N4450G1Z-0.2520F118.1
N4460G1X2.5406F189.0
N4470G00Z0.5000
N4480G00X20.5406
N4490G1Z-0.2880F118.1
N4500G1X2.5406F189.0
N4510G00Z0.5000
N4520G00X20.5406
N4530G1Z-0.3240F118.1
N4540G1X2.5406F189.0
N4550G00Z0.5000
N4560G00X20.5406
N4570G1Z-0.3600F118.1
N4580G1X2.5406F189.0
N4590G00Z0.5000
N4600G00X20.5406Y10.0426
N4610G1Z-0.0360F118.1
N4620G1X2.5406F189.0
N4630G00Z0.5000
N4640G00X20.5406
N4650G1Z-0.0720F118.1
N4660G1X2.5406F189.0
N4670G00Z0.5000
N4680G00X20.5406
N4690G1Z-0.1080F118.1
N4700G1X2.5406F189.0
N4710G00Z0.5000
N4720G00X20.5406
N4730G1Z-0.1440F118.1
N4740G1X2.5406F189.0
N4750G00Z0.5000
N4760G00X20.5406
N4770G1Z-0.1800F118.1
N4780G1X2.5406F189.0
N4790G00Z0.5000
N4800G00X20.5406
N4810G1Z-0.2160F118.1
N4820G1X2.5406F189.0
N4830G00Z0.5000
N4840G00X20.5406
N4850G1Z-0.2520F118.1
N4860G1X2.5406F189.0
N4870G00Z0.5000
N4880G00X20.5406
N4890G1Z-0.2880F118.1
N4900G1X2.5406F189.0
N4910G00Z0.5000
N4920G00X20.5406
N4930G1Z-0.3240F118.1
N4940G1X2.5406F189.0
N4950G00Z0.5000
N4960G00X20.5406
N4970G1Z-0.3600F118.1
N4980G1X2.5406F189.0
N4990G00Z0.5000
N5000G00X20.5073Y9.7926
N5010G1Z-0.0360F118.1
N5020G1X2.5073F189.0
N5030G00Z0.5000
N5040G00X20.5073
N5050G1Z-0.0720F118.1
N5060G1X2.5073F189.0
N5070G00Z0.5000
N5080G00X20.5073
N5090G1Z-0.1080F118.1
N5100G1X2.5073F189.0
N5110G00Z0.5000
N5120G00X20.5073
N5130G1Z-0.1440F118.1
N5140G1X2.5073F189.0
N5150G00Z0.5000
N5160G00X20.5073
N5170G1Z-0.1800F118.1
N5180G1X2.5073F189.0
N5190G00Z0.5000
N5200G00X20.5073
N5210G1Z-0.2160F118.1
N5220G1X2.5073F189.0
N5230G00Z0.5000
N5240G00X20.5073
N5250G1Z-0.2520F118.1
N5260G1X2.5073F189.0
N5270G00Z0.5000
N5280G00X20.5073
N5290G1Z-0.2880F118.1
N5300G1X2.5073F189.0
N5310G00Z0.5000
N5320G00X20.5073
N5330G1Z-0.3240F118.1
N5340G1X2.5073F189.0
N5350G00Z0.5000
N5360G00X20.5073
N5370G1Z-0.3600F118.1
N5380G1X2.5073F189.0
N5390G00Z0.5000
N5400G00X20.5073Y8.7839
N5410G1Z-0.0360F118.1
N5420G1X2.5073F189.0
N5430G00Z0.5000
N5440G00X20.5073
N5450G1Z-0.0720F118.1
N5460G1X2.5073F189.0
N5470G00Z0.5000
N5480G00X20.5073
N5490G1Z-0.1080F118.1
N5500G1X2.5073F189.0
N5510G00Z0.5000
N5520G00X20.5073
N5530G1Z-0.1440F118.1
N5540G1X2.5073F189.0
N5550G00Z0.5000
N5560G00X20.5073
N5570G1Z-0.1800F118.1
N5580G1X2.5073F189.0
N5590G00Z0.5000
N5600G00X20.5073
N5610G1Z-0.2160F118.1
N5620G1X2.5073F189.0
N5630G00Z0.5000
N5640G00X20.5073
N5650G1Z-0.2520F118.1
N5660G1X2.5073F189.0
N5670G00Z0.5000
N5680G00X20.5073
N5690G1Z-0.2880F118.1
N5700G1X2.5073F189.0
N5710G00Z0.5000
N5720G00X20.5073
N5730G1Z-0.3240F118.1
N5740G1X2.5073F189.0
N5750G00Z0.5000
N5760G00X20.5073
N5770G1Z-0.3600F118.1
N5780G1X2.5073F189.0
N5790G00Z0.5000
N5800G00X20.5073Y8.5339
N5810G1Z-0.0360F118.1
N5820G1X2.5073F189.0
N5830G00Z0.5000
N5840G00X20.5073
N5850G1Z-0.0720F118.1
N5860G1X2.5073F189.0
N5870G00Z0.5000
N5880G00X20.5073
N5890G1Z-0.1080F118.1
N5900G1X2.5073F189.0
N5910G00Z0.5000
N5920G00X20.5073
N5930G1Z-0.1440F118.1
N5940G1X2.5073F189.0
N5950G00Z0.5000
N5960G00X20.5073
N5970G1Z-0.1800F118.1
N5980G1X2.5073F189.0
N5990G00Z0.5000
N6000G00X20.5073
N6010G1Z-0.2160F118.1
N6020G1X2.5073F189.0
N6030G00Z0.5000
N6040G00X20.5073
N6050G1Z-0.2520F118.1
N6060G1X2.5073F189.0
N6070G00Z0.5000
N6080G00X20.5073
N6090G1Z-0.2880F118.1
N6100G1X2.5073F189.0
N6110G00Z0.5000
N6120G00X20.5073
N6130G1Z-0.3240F118.1
N6140G1X2.5073F189.0
N6150G00Z0.5000
N6160G00X20.5073
N6170G1Z-0.3600F118.1
N6180G1X2.5073F189.0
N6190G00Z0.5000
N6200G00X20.5156Y7.2763
N6210G1Z-0.0360F118.1
N6220G1X2.5156F189.0
N6230G00Z0.5000
N6240G00X20.5156
N6250G1Z-0.0720F118.1
N6260G1X2.5156F189.0
N6270G00Z0.5000
N6280G00X20.5156
N6290G1Z-0.1080F118.1
N6300G1X2.5156F189.0
N6310G00Z0.5000
N6320G00X20.5156
N6330G1Z-0.1440F118.1
N6340G1X2.5156F189.0
N6350G00Z0.5000
N6360G00X20.5156
N6370G1Z-0.1800F118.1
N6380G1X2.5156F189.0
N6390G00Z0.5000
N6400G00X20.5156
N6410G1Z-0.2160F118.1
N6420G1X2.5156F189.0
N6430G00Z0.5000
N6440G00X20.5156
N6450G1Z-0.2520F118.1
N6460G1X2.5156F189.0
N6470G00Z0.5000
N6480G00X20.5156
N6490G1Z-0.2880F118.1
N6500G1X2.5156F189.0
N6510G00Z0.5000
N6520G00X20.5156
N6530G1Z-0.3240F118.1
N6540G1X2.5156F189.0
N6550G00Z0.5000
N6560G00X20.5156
N6570G1Z-0.3600F118.1
N6580G1X2.5156F189.0
N6590G00Z0.5000
N6600G00X20.5406Y7.5251
N6610G1Z-0.0360F118.1
N6620G1X2.5406F189.0
N6630G00Z0.5000
N6640G00X20.5406
N6650G1Z-0.0720F118.1
N6660G1X2.5406F189.0
N6670G00Z0.5000
N6680G00X20.5406
N6690G1Z-0.1080F118.1
N6700G1X2.5406F189.0
N6710G00Z0.5000
N6720G00X20.5406
N6730G1Z-0.1440F118.1
N6740G1X2.5406F189.0
N6750G00Z0.5000
N6760G00X20.5406
N6770G1Z-0.1800F118.1
N6780G1X2.5406F189.0
N6790G00Z0.5000
N6800G00X20.5406
N6810G1Z-0.2160F118.1
N6820G1X2.5406F189.0
N6830G00Z0.5000
N6840G00X20.5406
N6850G1Z-0.2520F118.1
N6860G1X2.5406F189.0
N6870G00Z0.5000
N6880G00X20.5406
N6890G1Z-0.2880F118.1
N6900G1X2.5406F189.0
N6910G00Z0.5000
N6920G00X20.5406
N6930G1Z-0.3240F118.1
N6940G1X2.5406F189.0
N6950G00Z0.5000
N6960G00X20.5406
N6970G1Z-0.3600F118.1
N6980G1X2.5406F189.0
N6990G00Z0.5000
N7000G00X20.5156Y6.2663
N7010G1Z-0.0360F118.1
N7020G1X2.5156F189.0
N7030G00Z0.5000
N7040G00X20.5156
N7050G1Z-0.0720F118.1
N7060G1X2.5156F189.0
N7070G00Z0.5000
N7080G00X20.5156
N7090G1Z-0.1080F118.1
N7100G1X2.5156F189.0
N7110G00Z0.5000
N7120G00X20.5156
N7130G1Z-0.1440F118.1
N7140G1X2.5156F189.0
N7150G00Z0.5000
N7160G00X20.5156
N7170G1Z-0.1800F118.1
N7180G1X2.5156F189.0
N7190G00Z0.5000
N7200G00X20.5156
N7210G1Z-0.2160F118.1
N7220G1X2.5156F189.0
N7230G00Z0.5000
N7240G00X20.5156
N7250G1Z-0.2520F118.1
N7260G1X2.5156F189.0
N7270G00Z0.5000
N7280G00X20.5156
N7290G1Z-0.2880F118.1
N7300G1X2.5156F189.0
N7310G00Z0.5000
N7320G00X20.5156
N7330G1Z-0.3240F118.1
N7340G1X2.5156F189.0
N7350G00Z0.5000
N7360G00X20.5156
N7370G1Z-0.3600F118.1
N7380G1X2.5156F189.0
N7390G00Z0.5000
N7400G00X20.5156Y6.0163
N7410G1Z-0.0360F118.1
N7420G1X2.5156F189.0
N7430G00Z0.5000
N7440G00X20.5156
N7450G1Z-0.0720F118.1
N7460G1X2.5156F189.0
N7470G00Z0.5000
N7480G00X20.5156
N7490G1Z-0.1080F118.1
N7500G1X2.5156F189.0
N7510G00Z0.5000
N7520G00X20.5156
N7530G1Z-0.1440F118.1
N7540G1X2.5156F189.0
N7550G00Z0.5000
N7560G00X20.5156
N7570G1Z-0.1800F118.1
N7580G1X2.5156F189.0
N7590G00Z0.5000
N7600G00X20.5156
N7610G1Z-0.2160F118.1
N7620G1X2.5156F189.0
N7630G00Z0.5000
N7640G00X20.5156
N7650G1Z-0.2520F118.1
N7660G1X2.5156F189.0
N7670G00Z0.5000
N7680G00X20.5156
N7690G1Z-0.2880F118.1
N7700G1X2.5156F189.0
N7710G00Z0.5000
N7720G00X20.5156
N7730G1Z-0.3240F118.1
N7740G1X2.5156F189.0
N7750G00Z0.5000
N7760G00X20.5156
N7770G1Z-0.3600F118.1
N7780G1X2.5156F189.0
N7790G00Z0.5000
N7800G00X20.5156Y5.0063
N7810G1Z-0.0360F118.1
N7820G1X2.5156F189.0
N7830G00Z0.5000
N7840G00X20.5156
N7850G1Z-0.0720F118.1
N7860G1X2.5156F189.0
N7870G00Z0.5000
N7880G00X20.5156
N7890G1Z-0.1080F118.1
N7900G1X2.5156F189.0
N7910G00Z0.5000
N7920G00X20.5156
N7930G1Z-0.1440F118.1
N7940G1X2.5156F189.0
N7950G00Z0.5000
N7960G00X20.5156
N7970G1Z-0.1800F118.1
N7980G1X2.5156F189.0
N7990G00Z0.5000
N8000G00X20.5156
N8010G1Z-0.2160F118.1
N8020G1X2.5156F189.0
N8030G00Z0.5000
N8040G00X20.5156
N8050G1Z-0.2520F118.1
N8060G1X2.5156F189.0
N8070G00Z0.5000
N8080G00X20.5156
N8090G1Z-0.2880F118.1
N8100G1X2.5156F189.0
N8110G00Z0.5000
N8120G00X20.5156
N8130G1Z-0.3240F118.1
N8140G1X2.5156F189.0
N8150G00Z0.5000
N8160G00X20.5156
N8170G1Z-0.3600F118.1
N8180G1X2.5156F189.0
N8190G00Z0.5000
N8200G00X20.5156Y4.7563
N8210G1Z-0.0360F118.1
N8220G1X2.5156F189.0
N8230G00Z0.5000
N8240G00X20.5156
N8250G1Z-0.0720F118.1
N8260G1X2.5156F189.0
N8270G00Z0.5000
N8280G00X20.5156
N8290G1Z-0.1080F118.1
N8300G1X2.5156F189.0
N8310G00Z0.5000
N8320G00X20.5156
N8330G1Z-0.1440F118.1
N8340G1X2.5156F189.0
N8350G00Z0.5000
N8360G00X20.5156
N8370G1Z-0.1800F118.1
N8380G1X2.5156F189.0
N8390G00Z0.5000
N8400G00X20.5156
N8410G1Z-0.2160F118.1
N8420G1X2.5156F189.0
N8430G00Z0.5000
N8440G00X20.5156
N8450G1Z-0.2520F118.1
N8460G1X2.5156F189.0
N8470G00Z0.5000
N8480G00X20.5156
N8490G1Z-0.2880F118.1
N8500G1X2.5156F189.0
N8510G00Z0.5000
N8520G00X20.5156
N8530G1Z-0.3240F118.1
N8540G1X2.5156F189.0
N8550G00Z0.5000
N8560G00X20.5156
N8570G1Z-0.3600F118.1
N8580G1X2.5156F189.0
N8590G00Z0.5000
N8600G00Z0.8000
N8610G00X0.0000Y0.0000
N8620M09
N8630M30
%

[ger21]

Couple things.
1) Your g-code is programmed to cut at 189ipm, not 80.
Sounds like your motor tuning is set to 80ipm, which is limiting both your cutting speeds and rapids to 80ipm.
The Velocity setting in Mach3's motor tuning screens is what the rapid speeds are.

If you want to minimize the rapid moves, try using a Fluting toolpath. Set it to ramp at both ends, and set the ramp distance to 0.0. It will lift at each end, but then go back down and cut in both directions, with no rapids. Should be a LOT faster.

[rodjava]

Gerry,

You are right about the 189 inches per minute. I was setting it at 80 mm/sec in Aspire and thought I was cutting at 80 inches per minute. Both ipm and mm/ses translates to the same speeds.

Thanks for the suggestion for the fluting tool path. Now that I made changes to the motor tuning, I can rapid back to the cut start at Velocity of 544 inches per minute. Wow, this is fast and don't need to cut in both directions any more.

Also, thanks for the suggestion for the motor tuning. I maxed out the accel and velocity for both x and y axis and now have Velocity set at 544 and Accel at 120 inches per minute.

Wow, what a improvement in speeds! I don't normally cut at these speeds, but it's good to know it's possible. Maybe good for cutting foam or for showing off to friends.

I can now max out the full potential of the DMM servos I have.

Thanks again,
Rod

[victorofga]

you can cut on a zig-zag path down...

Vectric Forum • View topic - How do I cut back and forth on a single line?

Vectric Forum • View topic - Profile Toolpath That Rasters in the Zaxis?

it is a long time issue.. migthbe some day it will be added..
ace converter from dakeng website as i remember does forth n back toolpathing...