510,064 active members
3,247 visitors online
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > wrong ATC arm position-wrong magazine mill position on mori seiki NV4000 DCG
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Nov 2012
    Posts
    0

    wrong ATC arm position-wrong magazine mill position on mori seiki NV4000 DCG

    Hello guys! I need your help for once more. I had a problem with my machine's write home positions. I figure out how to solve it for the X-Y-Z axis (red arrows alignment procedure) but.... I cant find the way to set the correct position for the magazine mill (axis [4] i suppose). So i cant work my machine because the atc arm indicator is light off. Neither atc manual mode works. Please anybody knows the procedure for setting the correct position of the magazine's mile?????

    Thank you

  2. #2
    Registered
    Join Date
    Nov 2012
    Posts
    0
    I solve it! If anyone needs any information about setting of zero point procedure at mori seiki NV4000 DCG machines, just ask me here!

  3. #3
    Registered
    Join Date
    Mar 2016
    Posts
    1

    Re: wrong ATC arm position-wrong magazine mill position on mori seiki NV4000 DCG

    Quote Originally Posted by axieros View Post
    Hello guys! I need your help for once more. I had a problem with my machine's write home positions. I figure out how to solve it for the X-Y-Z axis (red arrows alignment procedure) but.... I cant find the way to set the correct position for the magazine mill (axis [4] i suppose). So i cant work my machine because the atc arm indicator is light off. Neither atc manual mode works. Please anybody knows the procedure for setting the correct position of the magazine's mile?????

    Thank you
    Hi,
    glad to find someone with same CNC issue, i experiencing same problem after removed Magazine drive from a NV500a1, loose the axxis zero, i returned X Y & Z just can't retum M axis to Zero

Similar Threads

  1. Mori Seiki SL-25 Z-axis moving wrong amount
    By drlx3 in forum Mori Seiki lathes
    Replies: 0
    Last Post: 03-21-2014, 03:08 PM
  2. wrong Z position when posting
    By heathj in forum BobCad-Cam
    Replies: 0
    Last Post: 04-03-2013, 11:54 PM
  3. Canned Cycle Finish Starts in Wrong Position
    By JWB_Machining in forum Haas Lathes
    Replies: 7
    Last Post: 09-20-2012, 08:44 PM
  4. Lasercut 5.3 -MPC6515 vs wrong position
    By anantblock in forum LaserCut
    Replies: 1
    Last Post: 06-06-2012, 02:04 AM
  5. Turret in Wrong position
    By chipsahoy in forum Fanuc
    Replies: 4
    Last Post: 01-20-2010, 02:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •