585,914 active members*
3,937 visitors online*
Register for free
Login
IndustryArena Forum > Other Machines > Engraving Machines > I don't have any movement

Thread: I don't have any movement

Results 1 to 2 of 2
  1. 11-26-2012, 03:53 PM #1
    sml2010
    sml2010 is offline Registered
    Join Date
    Jun 2010
    Posts
    86

    I don't have any movement

    Hi to all

    I have a leetro motion control card but i don't have any motion in my x,y,z axis because i don't have +5volt out put for my all axis driver(please sea attached picture.


    Click image for larger version.  Name: 0.JPG  Views: 28  Size: 32.2 KB  ID: 171718


    I also i can't start the tube laser too for up reason.

    The DLL version and firmware isn't the same(please sea the second attached picture.

    Click image for larger version.  Name: 01.jpg  Views: 17  Size: 89.0 KB  ID: 171719


    Please help me to know how can i solve this problem?

    Thank you
    Reply With Quote Reply With Quote
  2. 01-03-2013, 06:55 PM #2
    Ed Sapp
    Ed Sapp is offline Registered
    Join Date
    Apr 2010
    Posts
    0

    No movement

    The 5 volt power comes from your power supply to the connections on the card. However all of the versions for your hardware and software are completely. You need to have all versions the same and they have to match the dongle version. Contact Leetro for some upgrades on these and try to get a complete wiring diagram.

    Ed Sapp
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. No movement after G00
    By slatronic in forum Mach Software (ArtSoft software)
    Replies: 15
    Last Post: 07-03-2012, 02:10 AM
  2. Erratic Z movement AND NO X Y MOVEMENT
    By 05miata in forum Mach Mill
    Replies: 4
    Last Post: 06-04-2012, 03:10 PM
  3. no x y z movement
    By bullseye in forum CamSoft Products
    Replies: 4
    Last Post: 07-29-2010, 02:39 AM
  4. G02 but X Y Z movement
    By PEU in forum G-Code Programing
    Replies: 5
    Last Post: 02-19-2010, 12:06 AM
  5. No Movement
    By wishmasterg in forum Mach Mill
    Replies: 3
    Last Post: 02-15-2007, 01:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules