Hello
Looking for used cnc mill 3 axis.
Machine height can not be more then 7 ft.
Trying to put the machine in the office type building.
Garage door opening max 7 ft.
Any help is appreciated.
Thanks for reading.
Hello
Looking for used cnc mill 3 axis.
Machine height can not be more then 7 ft.
Trying to put the machine in the office type building.
Garage door opening max 7 ft.
Any help is appreciated.
Thanks for reading.
I'm a noobie as well , depends on what your wanting to do.
I started with a shopmaster Patriot (it's for sale) , a little more travel in X & Y , has a lathe , running 3 axis , has 4 axis controler
Just bought a Tormach 1100. I'd say it's a MUCH better all machine over all for what we do.
NOTHING wrong with a Shopmaster , I wouldn't be doing what I'm doing if it wasn't for them. A GOOD way to find out if you want/like CNC work.
Is the 7ft the room heigth or only the door height. Many vertical mills will moved, with the Z-axe down. Therefore they are some half yard higher at work. My big 5 ton machine with the dollies under the machine fits into a door with 7ft height and wide.