Hi, I have a serious problem in control Fagor model 8025 GP, several alarms appears after the screen monitor was repaired, Error 64 Emergency, Error 111 LAN error, Error 099 Parity errorMs, Error 075, 076, 077, 078 Axis Feedback (all axis).
Someone could help me please?
Thread: Fagor 8025GP Problem
Results 1 to 3 of 3
-
04-21-2012, 12:06 AM #1
Registered
- Join Date
- Jun 2009
- Posts
- 108
Fagor 8025GP Problem
-
05-01-2012, 10:14 PM #2
Registered
- Join Date
- Dec 2011
- Posts
- 73
Sounds like your parameters may not be good. Do you have a known good back up? If so load those into the control and then cycle the power on and off.
In the case of the feedback alarms, are your cables on the feedback ports? are you cables known to be good?
If the parameter reload doesnt solve the issues, i would say call fagor. there could be a bigger issue at hand.
-
04-02-2023, 10:29 PM #3
Member
- Join Date
- Apr 2023
- Posts
- 2
Re: Fagor 8025GP Problem
Hi, Quite an old thread but I have exactly this issue too. I am calling Fagor tomorrow for assistance - did you get this issue sorted?
Reply With QuoteSimilar Threads
-
problem with cnc fagor 8025
By mamadoo95 in forum Fagor AutomationReplies: 2Last Post: 12-30-2011, 03:53 AM -
8025gp error code 68
By dyer215 in forum Fagor AutomationReplies: 2Last Post: 06-09-2011, 07:15 AM -
8025gp x axis following error
By dyer215 in forum Fagor AutomationReplies: 0Last Post: 02-22-2011, 12:50 PM -
8025GP program problem
By Al_The_Man in forum Fagor AutomationReplies: 1Last Post: 02-06-2011, 12:41 AM
Posting Permissions
