Originally Posted by
jaine
I have A Rollomatic 600X machine with auto loader.
Machine name : Rollomatic CNC 600X
Serial no : 346
Control : fanuc series 16 iM
It has X,Z axis on horizontal movement and Y is vertical.
U and W are loader axis .
problem is it giving
“W axis excess error(alarm no 410 W axis excess error) "when Unloading the tool to unloading tray “
at the same time it gives
Y axis over travel alarm also (alarm no 506) .(actually it moves down at that time and giving the alarm ( but happening fast )
not ready alarm at back side 7 segment display on all the amplifiers.
And Y and W are controlling from the same amplifier , other all axes from different amplifier ,
just listing down some of my observations,
*some times error not getting while unloading ( If it moves very slowly)
*error happening only at particular position of the operation
*W axis (ALL axis) works fine while loading
*Y axis also not showing any error other than unloading operation .
*mechanically W axis is smooth.
*Loading time machine W axis moves normally , there is no problem ,even at the 150% speed
*if moving this axis with MPG , it moves fine , all the axes
Please help me to solve this issue!!!!