Hi Guys!

Long time Lurker, first time poster

So, we have a Hardinge VMC where the interior worklight stopped working. The bulb blew out a few months ago, I changed it (worked fine for a few weeks). It blew out AGAIN, but this time after changing it, the light still won't come on!

We checked the switch on the light, and even tested with a multimeter the wires all the way to the main stack (in front) which leads into the back of the machine, out of sight. There was no power coming to the wire at all.

I'm guessing there must be a fuse or breaker somewhere in the machine, but tracing that wire will be alot more difficult now since we'll have to climb on top of the machine to trace the wire further.

I didn't see anything obviously burnt out or wrong in the electrical cabinet behind the machine (but that doesn't mean I didn't miss something if it's not obvious!)

Anyone else had this problem? Anyone knows if there's a fuse somewhere?