584,837 active members*
5,485 visitors online*
Register for free
Login
Page 2 of 2 12
Results 21 to 34 of 34
  1. #21
    Join Date
    Sep 2012
    Posts
    1543
    What the hell is your problem dude? Ask Hoss, he's commented on my videos and helped me out, check out reprap forums, you will see me there. I have nothing to prove over internet to a troll like you who follows people around doing exactly as you are now. Look up why to change from .5mm to .4mm in slicer, its all out there but it takes a person with better pc skills than you have it seems... Please quit hyjacking threads for your own amusement, nobody cares what you have to say.

  2. #22
    Join Date
    Dec 2012
    Posts
    0
    Quote Originally Posted by BAMCNC.COM View Post
    Wow, this thread turned funny.... Sorry I haven't been on this weekend to send you my config, but sounds like your getting help.... And you would be suprised what .4mm does when entered in slicer. Your right I don't have a lulzbot prusa right now, I sold it.....
    Do you troll everywhere? You never bought a printer from us and you never had an AO-100.

  3. #23
    Join Date
    Dec 2012
    Posts
    0
    Quote Originally Posted by CNCadmin View Post
    working great now!
    Good to hear.

  4. #24
    Join Date
    Dec 2012
    Posts
    0
    Quote Originally Posted by BAMCNC.COM View Post
    nobody cares what you have to say.
    Except the owner of these forums, apparently.

  5. #25
    Join Date
    Sep 2012
    Posts
    1543
    Quote Originally Posted by jebba View Post
    Do you troll everywhere? You never bought a printer from us and you never had an AO-100.
    Who said I bought one from you? I bought one 2nd hand, does it really matter? As far as "ao-100" I have no clue.If you read this thread I'm not trolling anything.

  6. #26
    Join Date
    Nov 2012
    Posts
    0
    Quote Originally Posted by CNCadmin View Post
    working great now!
    Hi CNCadmin,

    Great to hear! Do you have any new photo's you can show of the successfull print? I would be interested in seeing them.

    If you have any questions or comments, please feel free to ask.


    Best Regards,


    Jon Fye
    Sales Associate
    [email protected]
    1-970-377-1111 x633
    Aleph Objects, Inc.
    123 SW 12th Street
    Loveland, Colorado 80537
    United States of America

  7. #27
    Join Date
    Mar 2003
    Posts
    6855
    I need another one. I have many parts I need to print.

  8. #28
    Join Date
    Nov 2012
    Posts
    0
    Quote Originally Posted by CNCadmin View Post
    I need another one.
    Hi CNCadmin,

    You need another one of?

    If you have any questions or comments, please feel free to ask.


    Best Regards,


    Jon Fye
    Sales Associate
    [email protected]
    1-970-377-1111 x633
    Aleph Objects, Inc.
    123 SW 12th Street
    Loveland, Colorado 80537
    United States of America

  9. #29
    Join Date
    Nov 2012
    Posts
    0
    Hi CNCadmin,

    Oh you mean you need another printer! I would be happy to sell you another one if you like.

    If you have any questions or comments, please feel free to ask.


    Best Regards,


    Jon Fye
    Sales Associate
    [email protected]
    1-970-377-1111 x633
    Aleph Objects, Inc.
    123 SW 12th Street
    Loveland, Colorado 80537
    United States of America

  10. #30
    Join Date
    Dec 2012
    Posts
    0
    Quote Originally Posted by CNCadmin View Post
    I need another one. I have many parts I need to print.
    Get a setup like this:

    [ame=http://www.youtube.com/watch?v=-MOZwQ_8mv8]LulzBot / Aleph Obects, Inc. Headquarters - YouTube[/ame]



    How many do you want?

    -Jeff

  11. #31
    Join Date
    Aug 2008
    Posts
    187
    Quote Originally Posted by BAMCNC.COM View Post
    What the hell is your problem dude? Ask Hoss, he's commented on my videos and helped me out, check out reprap forums, you will see me there. I have nothing to prove over internet to a troll like you who follows people around doing exactly as you are now. Look up why to change from .5mm to .4mm in slicer, its all out there but it takes a person with better pc skills than you have it seems... Please quit hyjacking threads for your own amusement, nobody cares what you have to say.
    hmmm, more lies. i checked out your youtube page, no videos there on 3d printing and no comments by a hoss. did read this comment left for you, "Hey, you got to come back to the forum, You'll piss off some moderators..." seems you have a problem.

  12. #32
    Join Date
    Sep 2012
    Posts
    1543
    I deleted them after I sold my printer as most of them were problems I had to overcome, but that's cool you care so much to look at my account, that or your a stalker..... Scary...

  13. #33
    Join Date
    Nov 2012
    Posts
    0
    *everyone* If your comments do not pertain to the OP, then please take your irrelevant discussions to another thread or I will ask CNCadmin to lock this thread and remove all unrelated posts.

    I expect this section to remain civilized and on topic. If you wish to pursue tangents and engage in ad-hominem personal attacks against one another then please do it in another section/thread. That is all.

    :nono:

  14. #34
    Join Date
    Mar 2003
    Posts
    6855
    Sorry that I have not gotten back to this tread but I have since than corrected the printing issues seams i was not running the head hot enough.

Page 2 of 2 12

Similar Threads

  1. 3D Printing Live! Joining the ranks of the international 3D printing conferences
    By cncadmin in forum 3D Printer / 3D Scanner Discussion
    Replies: 0
    Last Post: 10-15-2013, 09:20 PM
  2. Sloppy x2 z gibs
    By sabastion in forum Linear and Rotary Motion
    Replies: 1
    Last Post: 08-03-2011, 12:50 PM
  3. sloppy X2 Z gibs
    By sabastion in forum Benchtop Machines
    Replies: 2
    Last Post: 07-29-2011, 01:40 AM
  4. Sloppy Spindle
    By twocik in forum Tormach Personal CNC Mill
    Replies: 9
    Last Post: 03-04-2011, 06:59 AM
  5. Sloppy Geometry - PLEASE HELP!!
    By NardisAmps in forum OneCNC
    Replies: 4
    Last Post: 05-19-2008, 08:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •