584,805 active members*
4,956 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Kao Ming KMC-2000SD (M03/M04 do nut work)
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2020
    Posts
    1

    Kao Ming KMC-2000SD (M03/M04 do nut work)

    Hello,

    I have Kao Ming KMC-2000SD with FANUC O-M, and it was working properly.

    One week ago it stopped respond to M03/M04 commands without any alarms, while the spindle respond to M19 command and return to it's ATC position

    I have checked all hardware items(valves, sensors, air presser, oil ...etc.) everything is OK.

    Does anyone have an idea about this issue?

    Thank you all in advance

  2. #2
    Join Date
    Feb 2024
    Posts
    1

    Re: Kao Ming KMC-2000SD (M03/M04 do nut work)

    Hello,
    We have a Kao Ming KMC-2000SD similar with yours.
    Our parameters erased and we need a software backup.
    Can you help us please.
    Regards.
    Yasin.

Similar Threads

  1. Replies: 4
    Last Post: 11-20-2018, 09:37 PM
  2. Replies: 0
    Last Post: 09-17-2018, 02:18 AM
  3. Replies: 2
    Last Post: 12-23-2015, 05:52 PM
  4. Work holding options to hold thin round work? .024, .046 etc
    By KyleH2 in forum MetalWork Discussion
    Replies: 0
    Last Post: 06-07-2010, 07:22 PM
  5. Kao Ming Tool Changer w/Fanuc OMC Control
    By DaveMCINC in forum Fanuc
    Replies: 1
    Last Post: 01-15-2009, 12:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •