[ropanach]

What drivers do I need to run a 15 year old new hermes that use to run on dos, I ran this for a wile were I work but I don't want to run it in dos, it takes to much time setting up. (That is why I have it)

I see there is allplot, cad, winpcsign, etc prograns that will run this but witch one will work with a pc NOT with mac3

Will acrobat run the hermes?
will any plot program run the unit?

[ropanach]

I pick up WinPcsing, it works quite well, Thanks.

[underthetire]

Could you tell me more about this software? Our pc died that used gravograph, and since it was win98, tough to find new pc hardware for it.

[ropanach]

I've not used Gravograph, and WinPCsing works for the most part like Adobe Potoshop 7.0, and it has the drivers for the Hermes 7000/9000, Potoshop does not have them that I can find. WinPCsing will work with Window systems and Mac. And it comes with the security dogal, remove the dogal no one can operate the unit.
Hope this helps
Roger