G'day
New to the site and thanking everyone for the great info on here.

I have recently been asked to program a mori TL-1 with a fanuc 6t- b controller. This machine is the one with 2 turrets. It is pretty old so i hope someone here might be able to help me.

Can anybody help me out with a sample program. Just a simple bush with some facing drilling and parting. This will be enough to get me into the harder stuff as i have had a lot of experiance with other controllers but not this one.
The other thing is the offsets are a lot different to the newer fanuc's that i have used so if anybody has got any pointers let me know.

Thanks in advance
Anyfish