I was having a problem with the tool changer not aligning up correctly with the Z axis. I tried moving the "cross" looking plate on top of the position switches on the back this would "clock" the carosel correctly. I guess I moved it too far and now the ATC alarm light will not go off. The only way I can get it to go off is by moving the "cross" so that the lights on the position switches go off. I can them move the carosel manually but when the position lights are on the ATC alarm light comes on and will not allow me to MO6 and call a tool. Please help as this was all functioning perfectly until I moved the "cross" looking piece in the back.
Results 1 to 2 of 2
-
01-17-2013, 03:27 PM #1
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 0
Takisawa Mach-v3 tool carosel problem
-
01-17-2013, 04:06 PM #2
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 0
Ok, apparently my counters are off so I need to know what parameters in the PMC control this.
Reply With QuoteSimilar Threads
-
turret problem for takisawa tc 2
By anantwaykole in forum Community Club HouseReplies: 0Last Post: 12-29-2008, 03:03 PM -
Fanuc 6mb tool carosel keeps spinning
By diamond in forum FanucReplies: 10Last Post: 03-16-2008, 08:56 AM -
NEED HELP : Takisawa mac v 2e tool changer
By srosson in forum MetalWork DiscussionReplies: 0Last Post: 02-15-2008, 02:50 PM -
Takisawa TS-10 Indexing Problem
By chriztopia in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 09-25-2006, 02:30 PM -
Takisawa TS-10 Index Problem
By chriztopia in forum CNC Machining CentersReplies: 0Last Post: 09-14-2006, 01:17 PM
Posting Permissions
