I have this working fine on a Fanuc 16i with one exception. The manual says I can use canned cycles while in this mode, but when I program a G83 for instance, it works fine except that it rapids rather than feeding, and there is no peck. So basically, it makes the move in and out of the hole, but at the rapid feed.
E.G.
Coordinate rotation of X about Y on a VMC
G18 G90 X0 Y0
G68 X0 Y0 R-45.0
G91 G83 Z-4.0 F5.0 Q.05 (This moves in the X+, Z- direction at a 45° angle)
Any help appreciated,
Thanks,
Dave