Hello,

I have old EDM machine (i got it) and there is few questions about it.
Is enybody who was owned or worked on this controll?
Machine is with partial documentation only and i dont know how to do few thinks:

1. In MDI mode i can move axes, in AUTO mode i can spark and everythink is working.
But how to use pedant to move axes by hand?
In auto mode keys for CYCEl - STOP, HALT etc. are working on pedant.
But after power ON i can move only one axis U+ from hand.
How to move all axes?
Maybe machine should be HOME make after start - HOW?

2. How to release the tool?
Machine is with ATC but ATC card is missing.
I know that this can be the problem but i dont think so, because i see on internet same machines without ATC but always same toolholder - BT30.
When use M08S100 spindle is working and rotate.
When G15 is used, C axis will go home and clamped.
On pedant i have TOOL CLAMP/UNCLAMP key but its not working like axes in manual.
I checked all wires, relays etc.
Maybe somethink i missed? Its hard to work without electrical diagrams.

By the way - how tool is released in this machine? By this Yaskawa DC Motor same for spindle rotation? How sequence is look for tool release/clamp?
From mechanical/electrical side.


If anybody can help me it will be a great!
Maybe somebody have operation manuals for this machine or electrical manual?
I can pay for copy because Sodick EUROPE cant find for me this documents since over 2 months!


best regards

Darek