584,833 active members*
5,486 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2011
    Posts
    5

    My Jcut 60-90 80W

    Hello lover's of machines,

    I wright you the result of my new experience, with a laser machine.

    I was using classic machines numériques before and for me Laser is new tecnology, so i was needing professionnel support to understand and choose
    the good model of machine.

    I decide to contact Mandy of Jcut, to find the best solution.

    I just start my machine, since one week, and i am more than surprise
    by the simplicity and the performance of this 60-90 80W.

    This machine is absolutely perfect.

    The work is very fine and the speed of the machine is terrible.

    The communication with computer can not be more simple and perfect.

    I am really happy and i think i have chance to find the best professionnal
    with Mandy and Jcut.

    So, i am happy to give you this perfect experience.

    The contact of Mandy :

    Jinan Jcut Cnc Equipment Co.,Ltd
    Website: laser cutting machine,plasma cutting machine-Jinan JCUT CNC Equipment Co.,Ltd and JCUT Cnc Router,Cutting Plotter,Laser Cutting Machine,Laser Engraving Machine
    Ebay ID: chinakzj
    Mandy
    Email and MSN :[email protected] and [email protected]
    Sype: wdzhangying
    Gmail: [email protected]
    Phone:0086-531-82374653


    I jus forget to say you "Merry Christmas",
    and sorry for my English very simple.

    With my best regards.

    Patrick.

  2. #2
    wklaserliu Guest

    laser cutting machine from our company

    Quote Originally Posted by pat'maqu View Post
    Hello lover's of machines,

    I wright you the result of my new experience, with a laser machine.

    I was using classic machines numériques before and for me Laser is new tecnology, so i was needing professionnel support to understand and choose
    the good model of machine.

    I decide to contact Mandy of Jcut, to find the best solution.

    I just start my machine, since one week, and i am more than surprise
    by the simplicity and the performance of this 60-90 80W.

    This machine is absolutely perfect.

    The work is very fine and the speed of the machine is terrible.

    The communication with computer can not be more simple and perfect.

    I am really happy and i think i have chance to find the best professionnal
    with Mandy and Jcut.

    So, i am happy to give you this perfect experience.

    The contact of Mandy :

    Jinan Jcut Cnc Equipment Co.,Ltd
    Website: laser cutting machine,plasma cutting machine-Jinan JCUT CNC Equipment Co.,Ltd and JCUT Cnc Router,Cutting Plotter,Laser Cutting Machine,Laser Engraving Machine
    Ebay ID: chinakzj
    Mandy
    Email and MSN :[email protected] and [email protected]
    Sype: wdzhangying
    Gmail: [email protected]
    Phone:0086-531-82374653


    I jus forget to say you "Merry Christmas",
    and sorry for my English very simple.

    With my best regards.

    Patrick.


    Dear after you check our web I think you will have interest in our machines, if machine have any problems, hope to help you if you have interest ,for more information please skype me : wkquiven
    email: [email protected]

    MSN :[email protected]

    Laser engraving machine|Laser cutting machine|CNC router-G.Weike Laser
    Attached Thumbnails Attached Thumbnails LC6090 laser cutting machine.jpg  

  3. #3
    Join Date
    Mar 2013
    Posts
    11
    Bonjour Patrick,
    toujours content de ta machine? pas de problème d'alignement des miroirs (ou de désalignement).
    Si tu as un peu de temps, nous pourrions échanger à propos de nos expériences respectives. Je possède une machine Chinoise plus grande avec un tube 150wts d'une autre marque.
    A bientot,

    Bernard

  4. #4
    Join Date
    Dec 2011
    Posts
    5
    Bonjour Bernard,

    Je suis toujours hyper content de ma machine.
    Depuis un an d'utilisation,
    j'ai nettoyé trois fois les miroirs, ce qui impose de refaire le réglage d'alignement à chaque nettoyage.

    Ce réglage est le plus délicat, il faut bien respecter le point laser au centre du papier,
    au début c'était un peu angoissant, mais maintenant ça va tout seul.

    J'étais informé par un ami possesseur de machine laser,
    il faut être très vigilant sur ce fait : nettoyage et réglage d'alignement.

    Sinon, tout marche impec.

    Au plaisir d'échanger avec toi, sur l'utilisation de nos machines.

    A bientôt,

    Patrick

  5. #5
    Join Date
    Mar 2013
    Posts
    11
    Bonjour Patrick,
    merci pour ta réponse. J'ai une machine de chez GWeike qui fait 1600x1200mm (dimensions de la table de travail) depuis juin 2013. Comme nous devions déménager l'atelier en fin d'année, nous avons seulement fait l'alignement des miroirs ainsi que quelques essais en septembre mais l'alignement a dû nous prendre au moins trois semaines. Après le déménagement l'alignement a été à refaire et vient de nous prendre encore beaucoup de temps sans que le résultat soit irréprochable. Nous avons peut être mal compris les étapes...
    Si tu as une bonne méthode, je suis preneur.
    Autrement, cette machine est-elle utilisée pour une activité pro ? que découpes tu avec? en ce qui me concerne, j'ai prévu de découper des pièces en caoutchouc jusqu'a à 5 à 6mm d'épaisseur (j'ai acheté un gros filtre à air) ainsi que de l'acrylique pour certains de nos clients qui ont besoin d’être dépannés rapidement.Le tube (Reci 150wts) semble efficace quand on utilise la bonne lentille (j'ai 3 lentilles de 50 à 100mm de focale).
    A bientot,

    Bernard

  6. #6
    Join Date
    Aug 2018
    Posts
    33
    Its a SCAM company. Please be careful.

  7. #7
    Join Date
    Aug 2018
    Posts
    33
    Reader's please note that all the above messages are created by JCUT. THEY ARE NOT GENUINE Company. Be careful, they are a very tricky company! They are just Spamming messages with their name. NOT TO BE TRUSTED.
    Last edited by pfavoril23; 10-18-2018 at 01:28 PM.

Similar Threads

  1. Jcut 90150B
    By alvyalvy in forum Chinese Machines
    Replies: 9
    Last Post: 03-27-2020, 08:50 AM
  2. JCUT 6090A or JCUT 6090B
    By Butterknife in forum Chinese Machines
    Replies: 81
    Last Post: 05-21-2018, 06:45 PM
  3. My Jcut 1218
    By albatros62 in forum Uncategorised WoodWorking Machines
    Replies: 0
    Last Post: 01-16-2013, 07:19 PM
  4. my jcut 60100
    By fabconv in forum Chinese Machines
    Replies: 8
    Last Post: 12-25-2012, 11:30 PM
  5. JCUT 6090B - HELP!!
    By shaffin in forum Chinese Machines
    Replies: 5
    Last Post: 08-03-2011, 02:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •